Audited Supplier
SAP6SU/12SU
Concrete
Modified PVA
Anti-Pilling, Abrasion-Resistant, Flame Retardant, Anti-Distortion, Anti-Static
Staple
White
High Strength Fiber
Miscellaneous Chain Synthetic
1000MPa
12gpa
SAPEN
Bag/Box+Pallet
D: 0.2mm, L: 6/12mm
Shanghai, China
3916909000
Product Description
POM Fibre used for UHPC
(SAP 6 SU /12 SU)
Description
UHPC special synthetic fiber uses hydrophilic modification technology for its surface treatment. It has excellent dispersibility in UHPC, and has good bonding performance with cement matrix materials, which can effectively reduce and inhibit UHPC plastic shrinkage, drying shrinkage, Micro-cracks caused by temperature changes and other factors significantly improve crack resistance, toughening, impact resistance, fire and explosion resistance of UHPC.
Features
Estimating Data
Dosage: the usual dosing amount is 5.0-50.0kg/m3 (the corresponding volume dosing amount is 0.4-4.0%).
Typical Application
Building decoration exterior wall, UHPC carved artwork, Cement flower pot products
Municipal road bricks etc.
Technical Information
| Fibre dimension | D: 0.2 mm; L:6 / 12mm |
| Minimum Tensile Strength | >1000 MPa |
| Modulus | >12 GPa |
| Elongation at break | ≤30% |
| Density | 1.4 g/cm3 |
| Acid&Alkali Resistance | Excellent |
| Moisture Content | ≤0.1% |
| Appearance | Transparent monofilament |
How should the fibre be used
Length: The length of UHPC should be 6-12mm,according to different thickness of components.
Stirring: After mixing the UHPC powder and water to make the slurry evenly, add the fibers, and then stir for 2 to 4 minutes, subject to the uniform dispersion of the fibers.
Curing: The construction and curing process of UHPC after adding fiber is exactly the same as the system without fiber.
Packing
1kg/bag, 20kg/big bag ,700kg/pallet, 7000kg/20' container, 14000kg/40' container.
Q: Can I have a sample order?
A: Yes,and we can provide 1kg free sample for customer.
Q: How do you ship the samples and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes around one week.
Q: Can I visit your factory?
A: Yes,welcome.
Q: Can you accept mixed batch of different products?
A: Yes, we are support different product mix wholesale, please communicate with us your detail demands.
Q: How long is your lead time?
A: Normally lead time is 5-10 days. It is depend on the quantity and request, please communicate with us your detail demands.
