Audited Supplier
XMPYT-81/460(A)
12 Months
12 Months
6000mm
Optional Dust Reducing Device
Jarlo
Bulk
8000x1950x2190
China
8430509000
Product Description
XMPYT-81/460(A) Scaling Rig
Structure and Dimensions
Min. Turning Radius
Max. Scaling Height
Main configuration
| No. | Parts | Brand |
| 1 | National IV engine | Yunnei |
| 2 | Gearbox | Jinlite |
| 3 | Drive axle | Kaichuang |
| 4 | Gear pump | Wanye |
| 5 | Hydraulic breaker | Anrui |
| 6 | Slewing bearing | Jingwei |
| 7 | Drive shaft | AVIC |
| 8 | Hydraulic valve | Paihesa |
| 9 | Swing cylinder | Zhongyi |
| 10 | Boom | Jarlo |
| 11 | Chassis | Jarlo |
| 12 | Cab | Jarlo |
| 13 | 8.25-15 tire | Baolong |
Main technical parameters
| Model | XMPYT-81/460(A) | ||||
| Item | Unit | Parameters | |||
| Whole machine performance | Overall size | L | mm | 6300±100 | |
| W | mm | 1850±50 | |||
| H | mm | 2200±50 | |||
| Min. Turning radius | Inner | mm | ≤3600 | ||
| Outer | mm | ≤5550 | |||
| Minimum ground clearance | mm | 225 | |||
| Maximum working height | mm | ≥6000 | |||
| Machine weight | kg | 5400 | |||
| Articulation angle | (°) | ±27 | |||
| Cab | - | fixed | |||
| Work boom | Working pressure | MPa | 14 | ||
| Rated pressure | MPa | 15.5 | |||
| Breaker rotation | ° | ±45 | |||
| Breaker tilt | ° | Up 60,down 30 | |||
| Hydraulic breaker | Impact energy | J | ≥460 | ||
| Impact frequency | Hz | 11-20 | |||
| Drill rod diameter | mm | 45 | |||
| Weight | kg | 80 | |||
| Working flow | L/min | 20-40 | |||
| Working pressure | MPa | ≤17 | |||
| Driving mechanism | Driving mode | - | Wheeled (articulated) | ||
| Driving speed | Gear 1 | km/h | 5.2±0.52 | ||
| Gear 2 | km/h | 9.5±0.95 | |||
| Gear 3 | km/h | 15.5±1.55 | |||
| Gear 4 | km/h | 21±2.1 | |||
| Grade-ability | (°) | ±15 | |||
Performance characteristics
2. The cab meets the mine safety ergonomics design, centralized control, comfort and convenience;
3. The thickened high-strength steel boom has strong load-bearing capacity and small boom vibration during work;
4. The articulated special chassis has a smaller turning radius and meets the needs of mine operations to the maximum extent;
5. The hydraulic torque converter and gearbox drive the engineering chassis, four-wheel drive, and good climbing performance.
