Audited Supplier
UC-3(A)
12 Months
12 Months
3000kg
4900mm
Jarlo
Bulk
8700x1900x2500mm
China
8428909090
Product Description
UC-3(A) Under Ground Lifting Work Platform
Turning radius
1. Four-wheel drive, articulated steering; the cab adopts ergonomic design and is equipped with air conditioner, which improves driving comfort-ability.
2. The front frame is equipped with a swing frame, which increases the swing angle of the front and rear car bodies in the vertical plane. The wheels have stronger adhesion and the vehicle has higher pass-ability.
3. It adopts National IV Cummins water-cooled engine, which has low noise, long life and reliable performance.
4. The Italian SAFIM dual-circuit braking system uses fully enclosed wet multi-disc hydraulic brakes and hydraulic release spring brakes to ensure braking safety.
5. The frame adopts post-weld annealing treatment and shot blasting treatment to eliminate welding stress and ensure the quality of the whole machine.
6. The hydraulic lifting platform can realize remote control operation.
Turning radius
Main configuration and technical parameters
Main performance characteristics
| Name | Unit | Parameters | |
| Overall Size | L | mm | 7415±100 |
| W | mm | 1900±50 | |
| H | mm | 2503±50 | |
| Total weight | kg | 8700±200 | |
| Max. Traction power | kN | ≥80 | |
| Min. Ground clearance | mm | 255 | |
| Gradeability(Heavy loaded) | % | 25 | |
| Steering angle | (º) | ±40 | |
| Lateral swing angle | (º) | ±6-8 | |
| Axle track | mm | 1530 | |
| Wheel base | mm | 3500 | |
| Turning radius | Inner | mm | 3865 |
| Outer | mm | 6173 | |
| Max. Driving speed | Gear I | km/h | 4.8±0.48 |
| Gear II | km/h | 10±1 | |
| Gear III | km/h | 18±1.8 | |
| Rated load capacity | kg | 3000 | |
| Maximum lifting height (from the ground) | mm | 4900 | |
| Platform size | L | mm | 3000 |
| W | mm | 1700 | |
| H | mm | 830 | |
Main performance characteristics
2. The front frame is equipped with a swing frame, which increases the swing angle of the front and rear car bodies in the vertical plane. The wheels have stronger adhesion and the vehicle has higher pass-ability.
3. It adopts National IV Cummins water-cooled engine, which has low noise, long life and reliable performance.
4. The Italian SAFIM dual-circuit braking system uses fully enclosed wet multi-disc hydraulic brakes and hydraulic release spring brakes to ensure braking safety.
5. The frame adopts post-weld annealing treatment and shot blasting treatment to eliminate welding stress and ensure the quality of the whole machine.
6. The hydraulic lifting platform can realize remote control operation.
