Audited Supplier
| Model No. | Universal Flange adaptor | Pressure | Pn10/Pn16/Pn25/Pn40 |
| Transport Package | Standard Wooden Pallets or Wooden Cases | Specification | DN40-DN600mm |
Universal series is solution to most pipe connections. With up to 29 tolerances on the pipe OD it not only eases installation but also reduce the expensive and time consuming trial holes, reduce stock holding and increase stock turn over.
Universal series is solution to Ductile Iron pipe , cast iron pipe, concrete pipe, steel pipe,
stainless steel pipe, asbestos cement pipe, pvc pipe, copper pipe, GRP pipe and ABS piep.
Ductile Iron Universal Coupling According to ISO2531&EN545
Size Range: DN40-DN600
Pressure: PN10/16
Bolts and Nuts material:Carbon Steel
Coating: Fusion Bonded Epoxy coating
Use: This kind of couplings can be used for ductile iron or PVC pipes.
Direction for use
The product is easy to install and easy to disassemble. Set the connector evenly in the joint position of two different pipes and then tighten the screws.Is a very flexible coupling system used to assemble almost all types of piping materials and to repair old piping systems.
Body | Ductile Iron GGG50/40 |
Gland | Ductile Iron GGG50/40 |
Gasket | EPDM according to EN681-1 |
Bolt &Nut | Galvanized carbon steel / hot dip galvanized steel/dacromet coating steel 4.8/8.8 grade |
Coating | Fusion boned epoxy more than 250 micron/ Rilsan Nylon |
FAQ
1.Can i get free samples?
A: Yes,we can provide you the free sample, but you need to bear their own delivery costs.
2.Can I request to change the form of packaging and transportation?
A:Yes,We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
3.Can i request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.
4.Can i have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.
5.Can you produce the products according to my own drawings?
A:Yes,we can produce the products according to your drawings that will be most satisfy you.
