Audited Supplier
PZ-15
Adjust
Combination
RoHS, CCC, ISO: 9001, CE
New
Non-Customized
0~400ºC;0~1000ºC;0~1600ºC
1input/1output
0/1~5V;0/4~20mA
0.2%F.S.
35mm DIN Rail
24VDC±10%
PARAGON
Box
ABSflame retardant
China
Product Description
| General | |
| Number of channels | 1input/1output |
| Output accuracy (20 ° C) | 0.2% F.S. |
| Temperature drift | 50ppm/K |
| Response time | <0.5s (0~90%) (TYP) |
| Insulation strength | 1500V AC/1min,2mA |
| Insulation resistance | Above 100M Ω at 500VDC |
| Electromagnetic compatibility | Compliant with GB/T18268 (IEC61326-1) |
| Weight | About 90g |
| Connected field equipment | Two wire thermocouple |
| Input data | |
| Input signal | 0~400ºC;0~1000ºC;0~1600ºC; |
| Excitation | ≥100KΩ |
| Output data | |
| Output signal | 0/1~5V;0/4~20mA |
| Output impedance | Current type ≤ 680 Ω; Voltage type ≥ 330K Ω |
| Power supply | |
| Supply voltage(Ue) | 24VDC±10% |
| Power protection | Reverse protection of power supply |
| Power consumption | <1W |
| Power supply mode | Independent power supply |
| Power connecting mode | Terminal power supply |
| Overall dimension | |
| Depth | 100mm |
| Height | 100mm |
| Width | 7.5mm |
| Housing | |
| Material | ABSflame retardant |
| Degree of protection | IP20 |
| Flammability rating | UL94/V0 |
| Colour | Black |
| EMC data | |
| Electrical fast transient/burst immunity | Compliant with:IEC 61326-1;A-leve |
| Surge immunity | Compliant with:IEC 61326-1;B-leve |
| Radiated,radio-frequency,electromagnetic field immunity | Compliant with:IEC 61326-1;conform to basic requirements |
| Electrostatic discharge immunity | Compliant with:IEC 61326-1;A-leve |
| Immunity to conducted disturbances, induced by radio-frequency fields | Compliant with:IEC 61326-1;conform to basic requirements |
| Low frequency common mode conduction | Compliant with:IEC 61326-1;conform to basic requirements |
| Operating conditions | |
| Continuous operating temperature | -20ºC~+60ºC |
| Storage temperature | -40ºC~+80ºC |
| Relative humidity | < 90% RH(no condensate) |
| Environmental requirements | There should be no strong vibrations, impacts, high currents, sparks or other electromagnetic induction effects in the surrounding environment. The air should not contain media that corrode chromium, nickel, and silver coatings, and should not contain flammable or explosive substances |
| Connection data | |
| Conductor cross section solid range | 0.5~2.5mm² |
| Conductor cross section AWG min. | 12 |
| Conductor cross section AWG max. | 24 |
| Stripping length | 8mm |
| Screw thread | M3 |
| Connection method | Screw connection |
| Tightening torque min. | 0.5 Nm |
| Tightening torque max. | 0.6 Nm |
| Installation | |
| Installation method | DIN35mm |
