Audited Supplier
Heat Accumulation
Professional Engineering Team
-
Available
Space Environment Simulation
in Seperated Parts
Sea Worthy Packing for Seperated Parts
Heat Accumulation
China
Product Description
Vacuum Heat Accumulation
Application:
To verify the adaptability and stability of the test equipment under high vacuum and low temperature condition.
Technical specification for Vacuum Heat Accumulation
| 1. Structure | Stainless steel expansion plate heat accumulation |
| 2. Operating temperature range | -196oC~+150oC |
| 3. Temperature uniformity | ±5oC |
| 4. Material | S30408 |
| 5. Total leakage rate | ≤1.0×10-5Pa.L/S |
| 6. Black paint half ring emissivity | ≥0.9 |
| 7. Working pressure | ≤1.0MPa |
| 8. Design and manufacture diameter range | 0.5m~20m |
Technical specification for Cryogenic helium cold plate
| 1. Structure | Stainless steel expansion plate heat accumulation |
| 2. Operating temperature range | 20k~423k |
| 3. Temperature uniformity | ±2oC |
| 4. Material | S30408 |
| 5. Total leakage rate | ≤2×10-6Pa.L/S |
| 6. Black paint half ring emissivity | ≥0.9 |
| 7. Working pressure | ≤1.0MPa |
| 8. Design and manufacture diameter range | Customized |
KM4000 Space Environment Simulation
Φ4000mm(ID)×5000mm(Straight side) Heat Accumulation
Vacuum container for leak detection
Heat accumulation and skeleton after assembly
Heat accumulation leak detection
Cryogenic helium cold plate
FAQ:
Q1: What's the advantage of your company?
A: Our company specializes in trading for more than 13 years. We know how to solve any kinds of emergency accident during trading to give you a high quality and safety services . Choose the most suitable manufacture to satisfy your requirements is our goal.
Q2: I do not have experience to purchase from China before. How to start my first order?
A: It is easy and simple. Please feel free to contact with us. Experienced team is ready to help you step by step.
Q3: Can I get some samples?
A: Yes, we're honored to offer you samples for quality check.
Q4:How to confirm the quality ?
A: Third party inspection is warmly welcome before shipment. We have cooperated with SGS,IEI, CCIC,TECHNICO,BV,FIDES,etc.If you require the previous release notice issued by them,we would like to send you before order.
Q5: Is it possible to know how is my product going on without visiting your company?
A: We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.
Q6: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always try to meet customers' requirement by adjusting workshop schedule.
Q7: What is your payment?
A: Normally, by T/T 30% down payment, 70% balance before shipment. 100% L/C at sight is also accepted by us. Besides, we have Kun Lun bank to receive Iranian payment.
