Audited Supplier
DM-QCL/DM-YCL
Online Technical Support
Online Technical Support
Quenching Furnace
CE
Horizontal Type
Dming
Vacuum Quenching Furnace
300*300*450mm-600*600*900mm
50-150kw
1320c
Touch Screen Can Save 50 PCS Programs
Quenching
Graphite Heater
0.67PA/H
6*10(-3)PA
+-5c
100kg-500kg
Dming
Wooden Box
334-669
China-Henan
8514199000
Product Description
Vacuum Oil Quenching Furnace for Workpiece Quenching Tempering Annealing Normalizing
Vacuum Gas Quenching Furnace
The vacuum gas quenching furnace is mainly used for the heat treatment of tool steel, die steel, elastic alloy, stainless steel, and 3D additional materials etc.The furnace is mainly composed by pressure tank, heating room, vacuum system,electric control system, air inflation system, water cooling system, pneumatic system and carrier cart etc.
Feature:
Vacuum Oil Quenching Furnace
The vacuum oil quenching furnace is mainly used for bright quenching and annealing of alloy steel, tool steel, die steel, high-speed steel, bearing steel, spring steel, and stainless steel. It is also used for heat treatment after brazing of ceramics and metal materials.The furnace is mainly composed by graphite chamber, graphite felt induction, PLC control system.
Feature:
Vacuum Gas Quenching FurnaceThe vacuum gas quenching furnace is mainly used for the heat treatment of tool steel, die steel, elastic alloy, stainless steel, and 3D additional materials etc.The furnace is mainly composed by pressure tank, heating room, vacuum system,electric control system, air inflation system, water cooling system, pneumatic system and carrier cart etc.
Feature:
- The heating chamber is composed by graphite heater, graphite soft felt and hard felt, the max operation temperature is 1300ºC.
- The multiserial graphite spray nozzle located inside the heating chamber along with the induction inwall. The gas uniform sprayed from the spray nozzle during gas quenching.
- The material platform is composed by graphite support, hearth and Al2O3 sticker. This structure will prevent the adhesion between platform and hearth during high temperature.
- Gas cooling system: which is composed by high press wheel blower, multistage high-efficient copper heat exchanger and duct deflector. Filling high purity N2 or Ar during gas cooling, spray to workpiece through duct deflector to achieve workpiece uniform cooling.
- The gas cooling pressure is adjustable from 1-10bar.
- Max cooling rate: from 1150ºC to 250ºC less than 7min. (The cooling water temperature is lower than 35ºC)
Vacuum Oil Quenching Furnace
The vacuum oil quenching furnace is mainly used for bright quenching and annealing of alloy steel, tool steel, die steel, high-speed steel, bearing steel, spring steel, and stainless steel. It is also used for heat treatment after brazing of ceramics and metal materials.The furnace is mainly composed by graphite chamber, graphite felt induction, PLC control system.
Feature:
- Adopt graphite tube as the heating element, with long lifetime and easy maintenance.
- The compound flash-board have excellent heat insulation and trapping effect.
- The structure is double room, the back room is for heating and front room is for oil and gas cooling. Upside is gas quenching room and downside is oil quenching room, including lifting device, charging device, oil mixing device and oil heating device.
- Lifting device: The lifting skip car is driving by screw and nut, and driving by three-speed gear motor. There are three speed on lifting skip car, low speed for sending material, low speed start, high speed oil quenching and low speed location.
- Oil mixing system: The mixer is driving by reducer, the deflector could promote the circular flowing of vacuum quenching and promote the oil cooling capacity. The mixer is standard part with low noisy and high efficiency.
- The workpiece transfer is smooth and flexible, safe and reliable.
- The gas cooling cover adopt staggered teeth flange structure to ensure the sealing in positive and negative pressure.
| Model | Working Size (W*H*D)mm | Max.Temp | Capacity | Temperature Uniformity | Power | Ultimate Vacuum |
| DM-QCL-334 | 300*300*450 | 1320ºC | 100kgs | ±5ºC | 50KW | 6x10-3Pa |
| DM-QCL-446 | 400*400*600 | 1320ºC | 200kgs | ±5ºC | 80KW | 6x10-3Pa |
| DM-QCL-557 | 500*500*700 | 1320ºC | 300kgs | ±5ºC | 120KW | 6x10-3Pa |
| DM-QCL-669 | 600*600*900 | 1320ºC | 500kgs | ±5ºC | 150KW | 6x10-3Pa |
| Can Be Customized | ||||||
| Model | Working size (W*H*D)mm | Max.Temp | Capacity | Temperature uniformity | Power | Ultimate Vacuum |
| DM-YCL-334 | 300*300*450 | 1320ºC | 100kgs | ±5ºC | 50KW | 6x10-3Pa |
| DM-YCL-446 | 400*400*600 | 1320ºC | 200kgs | ±5ºC | 80KW | 6x10-3Pa |
| DM-YCL-557 | 500*500*700 | 1320ºC | 300kgs | ±5ºC | 120KW | 6x10-3Pa |
| DM-YCL-669 | 600*600*900 | 1320ºC | 500kgs | ±5ºC | 150KW | 6x10-3Pa |
| Can Be Customized | ||||||
Q1: How is your company's product after-sales service system?
A: We have professional pre-sales and after-sales departments and
can respond to you within 8 hours to resolve any technical issues.
Q2: How about the quality guarantee period?
A: 2 years, exclude irrationally operating and consumable parts.
Q3: How about your products quality?
A: CE certification available and twice test before shipping.
Q4: What's your delivery time?
A: Conventional model needs 3 days.35 days for customized products
Q5: Are you a manufacturer or a trading company?
A: We are a factory with 10 years experience in the field.
