Audited Supplier
VGS-300 Valve Seat Pocket Cutter Kit 1.500 to 2.250 In. (38.5 - 57.1 mm)
The VGS-300 is used to machine cylinder heads for the installation of new valve seat rings. Replaceable carbide inserts are easity
adjusted to size with the micrometer provided, so the proper press fit can be obtained for cast iron or aluminum heads.
Part No. | Descriptions |
ASPC-1500 | Seat Pocket Cutter Head 1.5-1.687 in. (38.1-42.9mm)Range |
ASPC-1687 | Seat Pocket Cutter Head 1.687-1.875 in. (42.9-47.6mm)Range |
ASPC-1875 | Seat Pocket Cutter Head 1.875-2.062 in. (47.6-52.4mm)Range |
ASPC-2062 | Seat Pocket Cutter Head 2.062-2.25 in. (52.4-57.1mm)Range |
VGS-325 | Cutter Head Driver for .389 in.(9.88mm)Pilot |
VGS-410A | Pocket Cutter Setting Fixture with Setting Standard |
PSP-215A | Short Spring |
PSP-216A | Long Spring |
VSC-509A | Spring Bushing(4) |
PWM-5A | Hex T-Wrench |
Seat Pocket Cutter Heads Available
| ASPC-937 | .937"- 1.031" (23.8 mm-26.2 mm) |
| |||
| ASPC-1031 | 1.031"-1.125" (26.2 mm-28.6 mm) |
| |||
| ASPC-1125 | 1.125"-1.218" (28.6 mm-30.9 mm) |
| |||
| ASPC-1218 | 1.218"-1.312" (30.9 mm-33.3 mm) |
| |||
| ASPC-1312 | 1.312"-1.500"(33.3 mm-38.1 mm) |
| |||
| ASPC-1500* | 1.500"-1.687" (38.1 mm-42.8 mm) |
| |||
| ASPC-1687* | 1.687"-1.875"(42.8 mm-47.6 mm) |
| |||
| ASPC-1875* | 1.875"-2.062" (47.6 mm-52.4mm) |
| |||
| ASPC-2062* | 2.062"-2.250"(52.4 mm-57.1 mm) |
| |||
| ASPC-2250 | 2.250"-2.437"(57.1 mm-61.9 rmm) |
| |||
| ASPC-2437 | 2.437"-2.625" (61.9 mm-66.7 mm) |
| |||
| ASPC-2625 | 2.625"-2.812" (66.7 mm-71.4 mm) |
| |||
| ASPC-2812 | 2.812"-3.000" (71.4 mm-76.2 mm) |
| |||
|
|
| ||||
ADAPTERS | DESCRIPTION |
| ||||
AD-MS3 | #3 Morse Taper Drive Adapter |
| ||||
AD-MS4 | #4 Morse Taper Drive Adapter |
| ||||
AD-4SS | Bridgeport & DCM Drive Adapter | |||||
