Audited Supplier
VD4
High Voltage Circuit Breakers
Electric Type
High-Speed Circuit Breaker
Vacuum
Fixed
Moulded Case Circuit Breaker
3
Circuit Breaker
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, Ovp(Overvoltage Protection), RCCB
ISO9001-2000
Vacuum
VILLE
Wooden Packing
Iec
Ningbo China
85
Product Description
VD4 VCB Vacuum Circuit Breaker High Voltage Switchgear Indoor 12kV
13.8kV 24kV 35kV
Product introduction:
The vacuum circuit-breakers of type VD4 on with drawable parts for 36 kV or 40.5 kV rated voltage are intended
for indoor installation in air-insulated switchgear systems. Their switching capacity is sufficient to handle any
conditions arising from switching of equipment and system components under normal operating and fault
conditions, particularly short-circuits, within the parameters of their technical data. Vacuum circuit-breakers have
particular adswitching frequency in the working current range and/or where a certain number of short-circuit
breaking operations are expected. Type VD4 vacuum circuit-breakers are suitable for autoreclosing, and have
exceptionally high operating reliability and long life. The vacuum circuit-breakers designed in column form, are
supplied as withdrawable modules. Their basic structure is shown in figures 3/1,3/2,3/7 and 3/8.
1.2.1 Switchgear manufacture
The switchgear complies with the following specifications in accordance with GB, IEC and the relevant DIN VDE
publications respectively.
GB/T 11022, IEC 60694 and DIN VDE 0670 part 100, "Common specifications for high voltage switchgear and
controlgear standards".
GB 1984 and IEC 62271-100, "High-voltage alternating-current circuit-breakers".
Packing :
Our workshop
Our sales team
Our Services
1. | Pre sale service |
a. | make technical solution |
b. | send quotation, technical data sheet and drawing |
c. | prepare power transmission plan, testing plan,and shipment plan |
2. | In sale service |
a. | supervise the manufacturing schedule totally in accordance with the plan |
b. | send photos to customer during every manufacturing process(hold point) |
c. | inform the customer one week before testinng. |
3. | After sale service |
a. | installation and commissioning, training the workers |
b. | quick response within 12 hours any time |
c. | provide 12 months gurantee period normally. |
