Audited Supplier
Steel shaft belt (roll/plate) station steel shaft is elastic structure, flexible adhesion to the workpiece end face high-speed operation, knock cutting slag, slag broken off; Compared with the traditional sanding method, the removal of slag is more completely clean, the cost of using consumables is less than one tenth, and it is more energy saving and environmental protection. The abrasive belt is fitted to the end face of the workpiece by the elastic press wheel for high-speed grinding, which removes the fast burrs and reduces the abrasive belt loss by flexible contact with the workpiece. The abrasive block is a flexible material, which is close to the end face of the workpiece. The fast edge of the workpiece is cut by high-speed operation. The soft abrasive block can be extended into the groove holes of the workpiece to remove the internal burrs and round the corners.
| Belt conveying, conveying speed 1-5m/min variable frequency adjustable | Total power 28kw |
| The maximum processing width is 1050mm, the minimum processing is 100*50mm, and the maximum width can be customized to 2500mm | Control system (man-machine interface, PLC programming control, one-click start and stop equipment) |
| Power supply voltage (three-phase five-wire, 380V, 50HZ) | Adjustable positioning thickness 0-80mm |
Q:How to remove product burrs?
A:The equipment consists of two groups of planetary brush disk combined structure; A single brush disc high-speed autobiography, the whole combination of rapid rotation, the front and back two groups of brush disc combination running in the opposite direction, through sweeping, grinding, filing and other actions, all-round no dead Angle to the workpiece edge, holes, grooves burrs
Q:What is the price of the equipment?
A:According to customer product process needs, machine configuration depends,High equipment configuration, preferential prices, much cheaper than Europe and the United States
Q:What are the features of the equipment?
A:The company independent research and development manufacturing, with complete independent intellectual property rights; The equipment is convenient to operate, simple to maintain, energy saving and environmental protection, stable and durable, and the processing product efficiency is high and the quality is good, and the equipment is upgraded for the metal parts polishing industry.
Q:What is the delivery date of the goods?
A:The delivery time of our products in the peak season is 60 days, and the delivery time of our products in the off-season is about 30 to 45 days.
Q:What packing are the goods to be sent abroad?
A:The delivery time of goods abroad is long, and the wooden frame will be used to package to ensure the quality of the product is intact.
Q:What are the shipping methods supported by the goods?
A:We choose according to the needs of customers, FOB,CIF,CFR and so on.
