Audited Supplier
GYTS
Communication
Single-mode Fiber
OEM
Round Wire
100(N/100mm)<1000(N/100mm)
1000N<10000N
Double Core
CE, ISO9001, CNAS
OEM
PE
300km for 14days
More Than 10km Can Be Designed by Customer
No
Exporting Drum
INGO
Drum
3KM
China
8544700000
Product Description
GYTS
1. Cable cross-section
2. Cable Specification
2.1 Introduction
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, witch is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.
2.2 Color code
The tube color is nature. And fiber color in the tube starts from No. 1 Blue.
Note: S100 means interval 100mm black circle.
2.3 Cable structure and parameter
Note: Mechanical sizes are nominal values.
3. Characteristic of Optical Cable
3.1 Min. bending radius for installation
Static: 10 x cable diameter
Dynamic: 20 x cable diameter
3.2 Application temperature range
Operation: - 40ºC ~ +60ºC
Installation: -20ºC ~ +50ºC
Storage/transportation: - 40ºC ~ +70ºC
3.3 Main mechanical & environmental performance test
1. Cable cross-section
2. Cable Specification
2.1 Introduction
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, witch is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.
2.2 Color code
The tube color is nature. And fiber color in the tube starts from No. 1 Blue.
| No. | 1 | 2 | 3 | 4 | 5 | 6 |
| Color | Blue | Orange | Green | Brown | Gray | White |
| No. | 7 | 8 | 9 | 10 | 11 | 12 |
| Color | Red | Black | Yellow | Purple | Pink | Aqua |
2.3 Cable structure and parameter
| SN | Item | Unit | Value |
| 1 | No. of fibers | count | 96 |
| 2 | Tube diameter(±5%) | mm | 2.0 |
| 3 | Central strength member wire and inner PE sheath(±5%) | mm | 2.0/3.4 |
| 4 | Outer sheath thickness(±5%) | mm | 1.6 |
| 5 | Cable diameter(±5%) | mm | 11.6 |
| 7 | Cable weight(±10%) | kg/km | 145 |
3. Characteristic of Optical Cable
3.1 Min. bending radius for installation
Static: 10 x cable diameter
Dynamic: 20 x cable diameter
3.2 Application temperature range
Operation: - 40ºC ~ +60ºC
Installation: -20ºC ~ +50ºC
Storage/transportation: - 40ºC ~ +70ºC
3.3 Main mechanical & environmental performance test
| Item | Test Method | Acceptance Condition |
| Tensile Strength IEC 794-1-2-E1 | - Load: Short term tension - Length of cable: about 50m | - Fiber strain £ 0.6% - No fiber break and no sheath damage. |
| Crush Test IEC 60794-1-2-E3 | - Load: Short term crush - Load time: 1min | - Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage. |
| Impact Test IEC 60794-1-2-E4 | - Points of impact: 3 - Times of per point: 1 - Impact energy: 1J | - Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage. |
| Repeated Bending IEC 60794-1-2-E6 | - Bending radius: 20 x OD - No. of cycle: 30 | - Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage. |
| Torsion IEC 60794-1-2-E7 | - Length: 1m - Twist angle: ±180° - No. of cycle: 10 | - Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage. |
| Compound flow IEC 60794-1-2-E14 | - Length: 30cm - Temperature:70 oC±2 oC - Period:24h | - No outflow or dripping |
| Temperature Cycling IEC 60794-1-2-F1 | - Temperature:+20oC→-40oC→+60oC →+20oC - Time of each step: 12h - Number of cycle: 2 | - Loss change £ 0.1dB/km@1550nm - No fiber break and no sheath damage. |
