Audited Supplier
400060
Low Density Polyethylene/LDPE
General Plastics
Thermosetting Plastic
White
SINOPEC
25kgs/Bag
VIRGIN LDPE
China
3901100090
Product Description
1. LDPE Injection Grade
Tests | Value | Unit |
Melt Flow Rate (MFR) | 15 | g/10min |
Density | 0.922 | g/cm3 |
Tensile Yield Strength | 7 | Mpa |
Elongation at Break | 75 | % |
Wien Softening Point | 85 | °C |
Packing | In 25 kg PP woven bags,20MT/20'FCL | |
2. LDPE film grade
Tests | Value | Unit |
Melt Flow Rate (MFR) | 2 | g/10min |
Density | 0.9225 | g/cm3 |
Tensile Strength | 9 | Mpa |
Elongation at Break | 500 | % |
Fish eye max(0.3-2mm) | 30 | n/1200cm2 |
Stripes | 20 | cm/20m3 |
Packing | In 25 kg PP woven bags,20MT/20'FCL | |
Application:
- Fiber (Carpet, Textiles, Upholstery, etc.)
- Film (Shopping bags, casting film, multilayer film, etc.)
- Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
- Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
- Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.
