Audited Supplier
stator
Cold Stamping
Metal Stamping
Aluminum
Simple Single Process Dies
Polishing
Double Acting
Separation Process
Auto Accessories
0.02mm
Customized
Hitch Cover
Forged
Powder Coated/Hot DIP Galv/Zinc Plating/Black
Can Be Customized
Single Item
Qingdao
Product Description
Packaging Details | PP bag or as required |
| Port | Qingdao/China |
Selling Units | Single item |
Supply Ability | 100000 Piece/Pieces per Month |
Installing a trailer cover usually involves the following steps:1. Locate the trailer hook
Location recognition: Most cars have trailer hooks designed under the front and rear bumpers. The location can be marked in the vehicle manual and is usually covered by a round or square cover plate 1234567.
2. Open trailer cover
Manual press: Press repeatedly around the trailer hook cover to find an Angle to press open. If it is not used for a long time, it may be tighter.
Tool assistance: If manual press cannot be opened, you can use a small stick smaller than the diameter of the trailer hook cover, gently poke around. You can also use a flathead screwdriver, carefully pry off along the edge of the lid, preferably with a cloth wrap tool to prevent damage to the paint 123467.
3. Install the trailer tools
Select a trailer tool: The trailer tool can be a trailer rope or a trailer bar. No matter what kind of tool, when installing, ensure that the connection of the car hook is firm and reliable. Any safety latch on the tow hook needs to be locked in place 257.
Soft trailer rope: If you use soft trailer rope, both ends need to tie slipknot to avoid difficult to untie after killing the knot 2.
