Audited Supplier
581-585
Aluminum
Rim
4WD
12-26inch
Black
Wheel Cover
Equal Diameter Spoke
ISO, VIA, TUV, Tse/Pct
Normal Packaging
Replica, Aftermarket and 4X4 Alloy Wheel
From 12inch to 26 Inch
7 Days If Have in Stock, 20-40days After Received
Bestya
Carton Box
12-26
China
8708709100
Product Description
Bestya has more than 20000 alloy wheels mould for replica ,aftermarket and 4x4 wheels from 12inch to 26inch with VIA, JWL, TUV, TSE, PCT certificates. The design department of Bestya consists of a group of skilled and experienced designers who have great understanding of wheel history and fashion. All of them have over 10 years experienced on wheel design. OEM is also accept.
Product Introduction:
Bestya is use material Aluminum A356.2 to manufacture alloy Wheels from 12inch to 26inch with VIA, JWL, TUV, ISO, DOT certificates;
1. Chemical composition : A356.2 (Si 6.5-7.5,Mg 0.30-0.45,Ti<0.2,Fe<0.12 Mn<0.1 Cu<0.05 Zn<0.05 Al)
2. Finishing:black,silver,gunmetal,matt black,grey,hyper black,hyper silver,machined face,machined lip,color line,chrome,vacuum chrome,anodized,full polish,milling, sand blast, two colors, etc.
3.Process: lower pressure, Gravity casting
4. Quality Guarantee: ISO/TS 16949:2000quality system, TUV(German ), VIA/JWL (Japanese),TSE( Turkey),PCT(Russia)
5. All the new wheel sample must pass below test,If one don't pass. We will change the new mold than make test again till all passed. Which include Dynamic fatigue in the curve test,Dynamic radial fatigue test,Impact resistance test,Distorton of flange test,Resistance to corrosion test,Tire Impermeability test, Tire mounting test,Hidden crack test,Roll test,Dimension test,Ejection test,tatic stability test.
4x4 Alloy wheels are hot selling in USA,Canada, Australia, Mexico etc
Replica and aftermarket alloy wheels:
1>. Certification: Our alloy wheels have passed the test and got TSE,PCT,TUV,JWL/VIA,SFI certification
Make TSE certification with Turkish engineers in our factory. We pass all the test and get certification:
2>. Factory information: Equipment: 25 Low pressure casting machines and 22 gravity casting machines and over 20,000 car wheels models.
3.>.Warehouse and delivery:
4.>.Customer
5.>.Advantage: Compared with other supplier, our advange is below,pls check:
If you have any question,pls do not hesitate to contact with Sally:
Product Introduction:
Bestya is use material Aluminum A356.2 to manufacture alloy Wheels from 12inch to 26inch with VIA, JWL, TUV, ISO, DOT certificates;
1. Chemical composition : A356.2 (Si 6.5-7.5,Mg 0.30-0.45,Ti<0.2,Fe<0.12 Mn<0.1 Cu<0.05 Zn<0.05 Al)
2. Finishing:black,silver,gunmetal,matt black,grey,hyper black,hyper silver,machined face,machined lip,color line,chrome,vacuum chrome,anodized,full polish,milling, sand blast, two colors, etc.
3.Process: lower pressure, Gravity casting
4. Quality Guarantee: ISO/TS 16949:2000quality system, TUV(German ), VIA/JWL (Japanese),TSE( Turkey),PCT(Russia)
5. All the new wheel sample must pass below test,If one don't pass. We will change the new mold than make test again till all passed. Which include Dynamic fatigue in the curve test,Dynamic radial fatigue test,Impact resistance test,Distorton of flange test,Resistance to corrosion test,Tire Impermeability test, Tire mounting test,Hidden crack test,Roll test,Dimension test,Ejection test,tatic stability test.
4x4 Alloy wheels are hot selling in USA,Canada, Australia, Mexico etc
Replica and aftermarket alloy wheels:
1>. Certification: Our alloy wheels have passed the test and got TSE,PCT,TUV,JWL/VIA,SFI certification
Make TSE certification with Turkish engineers in our factory. We pass all the test and get certification:
2>. Factory information: Equipment: 25 Low pressure casting machines and 22 gravity casting machines and over 20,000 car wheels models.
3.>.Warehouse and delivery:
4.>.Customer
5.>.Advantage: Compared with other supplier, our advange is below,pls check:
| Company strength | We have own alloy wheel factory and also cooperation over 50 large wheel factories in China |
| Wheel design | Replica alloy wheel,aftermaket alloy wheel,4x4 offroad alloy wheel |
| Wheels diameter | From 12inch to 26 inch |
| Certificate | We passed TSE(Turkey),PCT(Russian),TUV(Germany),JWL/VIA(Janaese),SFI(USA) and other certificates |
| Casting Process | Gravity Casting, Low Pressure & Heat Treatment |
| Capacity | More than 5000000 pieces annually |
| Raw Material | Aluminum A356.2,Best material for alloy wheels |
| Finishing | Black,silver,gun metal,matt black,gray,hyper black,hyper silver,machined face,machined lip,color line,chrome,vacuum chrome,color-ele,etc |
| Packing | Carton, Pallet or As demand |
| Delivery time | 7 days if have in stock, 20-40days after received your deposit |
| OEM/ODM | Both of OEM and ODM is accepted |
| Payment | 30% in advance for production and the rest of balance against B/L copy |
| Free mould charge | Free mould charge policy for professional customer |
| Wheel mold quantity | More than 2600 existing designs of custom wheel and replica wheel,More than 300 new moulds be developed per year recently |
| Mold production time | 20 days moulds making,10 days sample making,20-30 days normal order making |
| Exclusive protect | Exclusive protect for professional customer when requirement reached |
| Inspect team | 100% inspection before loading |
| New wheel test | All the new wheel sample must pass below test,If one don't pass. We will change the new mold than make test again till all passed.Dynamic fatigue in the curve test,Dynamic radial fatigue test,Impact resistance test,Distorton of flange test,Resistance to corrosion test,Tire Impermeability test, Tire mounting test,Hidden crack test,Roll test,Dimension test,Ejection test,tatic stability test. |
If you have any question,pls do not hesitate to contact with Sally:
