Audited Supplier
VS-H090
Magnetic Displacement Sensor
Analog Type
Angular Displacement
Integration
Stainless Steel
IP65
CE
Customized
Square Wave
Magnetoelectric
Yuanben
Carton
Shanghai
Product Description
VS-H090 speed sensor for traction and braking of EMU
Description
Yuanben VS-H090 magnetic speed sensor consists of a magnetic element and a permanent magnet. The vs-h090 magnetic speed sensor is mainly used in the traction and braking system of EMUs to measure the speed of motor. It can also be used in the occasions that meet the installation conditions and need to detect the speed.
Parameters
Drawing and Picture
Description
Yuanben VS-H090 magnetic speed sensor consists of a magnetic element and a permanent magnet. The vs-h090 magnetic speed sensor is mainly used in the traction and braking system of EMUs to measure the speed of motor. It can also be used in the occasions that meet the installation conditions and need to detect the speed.
Parameters
| Working Temperature | -40ºC ~ +125ºC |
| Relative Humidity | < 100%(Ambient temperature 25ºC) |
| Supply Power | DC 12V ±20% |
| Output Signal Frequency Range | 0~15kHz |
| Air Gap | 0.3mm ~ 1.5mm |
| Output Waveform | Square wave, and rising edge and falling edge time ≤ 3µs |
| Output Channels | 2 |
| Load Resistance | ≥500Ω |
| No-load Current Consumption | ≤45mA |
| Duty Ratio | 50% ± 15% |
| Phase Difference | 90°± 36° |
| High Voltage | When load resistance is 1kΩ: High voltage VH ≥ 0.8 supply power and ≥ 8V |
| Low Voltage | ≤0.70V |
| Dielectric Strength | AC2000Vr.m.s [50Hz 60s] |
| Insulation Resistance | ≥100MΩ(500V Megger) |
| Power Polarity, Output Short Circuit Protection | Yes |
| Ingress Protection | IP68 |
Drawing and Picture
