Audited Supplier
WD2611
Carbon Chain Polymer
Water White Transparent Liquid
70 ºC
55 ± 2% (150 ºC/1h)
4500-6000 Cps/25ºC
It Has Fast Drying, High Hardness, Good Compatibil
Support
Metal and Plastic Primers, in UV Formula
Support
50000 Tons
according to requirements
Metal Drum
20kg/drum; 200kg/drum
Guangdong, China
3902900090
Product Description
| WD2611 | WD2611 is a thermoplastic acrylic resin characterized by fast drying, high hardness and good compatibility with UV resin. |
| Tg | 70 ºC |
| Solid content | 55 ± 2% (150 ºC/1h) |
| Viscosity | 4500-6000 CPS/25ºC |
| Appearance(25ºC) | Water white transparent liquid |
| Color value | ≤1 |
| Fineness | ≤ 5 μ M |
| Acid value | (mgKOH/g) 7-10 |
| Solvent | toluene, butyl acetate |
| characteristic | It has fast drying, high hardness, good compatibility with UV resin, and improves adhesion to the substrate (approximately 1.0% hydroxyl content). |
| Application | Suitable for metal, plastic primer, quick drying PU two-component paint; Adding and modifying UV resin. |
| package | 20KG net weight iron bucket and 200KG net weight iron bucket. |
| storage | The resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 6 months; |
| secure | Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology. |
| pay attention to | Please wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet |
The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.
Factory/Production Base
Experimental/Office Area
A. Are we a factory or a trading company?
A. Is the test sample free of charge?
b. The samples are free, you only need to pay for shipping
A. What is the minimum order quantity?
b. Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
Note: The minimum quantity of orders depends on different types of materials. Please contact us.
A. Can we accept OEM of the product?
b. Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.
A. What is the delivery cycle?
b. Delivery cycle - peak season: one month. Delivery cycle - off-season: within 15 workdays
Note (The specific delivery time is determined by the ordered product and quantity)
