Audited Supplier
WX-958
Best Service According to Customer's Requiremnt
1 Year
Powder Coating Gun
Powder Coating
Steel
CE, ISO
Electrostatic Powder Spray Machine
3-5days
50W
48.5X47X59cm
22kgs
WANXIN
Wooden Carton or Carton
CE, SGS, ISO9001
China
84243000
Product Description
WX-958 Powder Coating Machine
1.BRIEF INTRODUCTION
The WX-958 electrostatic powder coating machine with best price&high quality with lower repairing ratio& hot sale.
Electric powder coating machine is widely used in metal surface treatment such as alloy wheel, bike frames, iron furniture, fence, pallet rack, industrial components, powder coating machine provides a durable and beautiful coverage on those parts.
2.DESCRIPTION & ADVATANGES
- With flat and smooth appearance and workpiece with no deep corners.
- High sensitivity and durability.
- Thickening resistance to puncture the tip, the low maintenance rate.
- With circuit protection, voltage self-adjusting function, to ensure a perfect spraying effects.
- High voltage module near the nozzle, low voltage loss, replaceable high voltage components to bring convenience to the maintenance.
- Large flow of pneumatic components, in the smaller air pressure, can still achieve higher powder.
- All stainless steel for powder cartridge, can not use tools to easily remove all parts and clean.
- Two central gas design, so that the needle is no longer needle-guided fluid powder, to enhance the discharge effect, improve the rate of powder.
- Rotating atomized air flow is greatly improved coating quality.
3.TECHNICAL PHARAMETER
| Input Voltage | Power | Protection Grade | Output HV | Output Current |
| 220V/50HZ | 50W | IP-54 | 0~100KV | 0~150μA |
| Compressed Air-in | Air Consumption | Injection Capacity | Polarity | Working Temperature |
| 0.4~0.6Mpa | Max. 13.2m3/h (At 0.4Mpa) | Max. 550g/min | Negative | -10ºC~45ºC |
4.CONFIGURATION
- 1 × Manual Powder Gun With Gun Cable
- 1 × Powder Gun Spare Parts
- 1 × Control Unit(19.5x20x16cm)
- 1 × Powder Injector
- 1 × Fluidized Powder Hopper(size:21x21x23cm)
- 1 × Holder(21x21x28cm)
- 1 × Oil-Water Separator
- 1 × Pressure Regulating Valve
- 1 × Powder Hose ,Air Tubes ,Grounding Line
Certificate
5.COMPANY Profile:
Jiangsu Xintu Machinery Co., Ltd is one of the leading Manufacturers in powder coating equipment or total line and flocking machine ,Our company found in 2011, with the factory in Jiangsu province nearby Shanghai city. it would take up a considerable 25,000square meters.
Almost 10 years experience in offering a wide variety products such as powder coating equipment,
flocking machine and their accessories, also if customers have a specific request can according to clients parameters to customized machine or line.
we have developed steady business relationship with clients from all over the world such as North America, Europe, middle East, Southeast Asia and so on.
We have experienced and skilled workers, QC team and QA system,also have ISO9001,CE,SGS certification.100%quality checking and tests before shipment.
We will offer you the most competitive price and best service!
Contact person: Tom Feng
Mobile phone :0086 17131159740
Address: Jiangfeng Road 15 , Binhai industrial Zone, Qidong, Nantong, China
