




Principle And Workflow
1.Adsorption: Exhaust gas flows through the resin bed, where VOCs are selectively captured by the macroporous resin.
2.Desorption: Once saturated, the resin is regenerated using thermal or solvent-based methods, releasing the VOCs for recovery or further treatment.
3.Recycling: Regenerated resin is reused for continuous adsorption cycles, ensuring long-term efficiency.
4.Emission Compliance: Treated exhaust gas is discharged, meeting regulatory standards for VOC emissions.
This efficient, repeatable process provides reliable VOC removal while minimizing waste and energy consumption.
1.Shape: the resin is a regular spherical particle, the running wind resistance is small;
2.Pure and clean:contain no metal impurities, in the process of exhaust gas adsorption will not cause catalytic polymerization or combustion and other hidden dangers;
3.High strength: good mechanical strength, acid, alkali, high temperature resistance;
4.Good accuracy: synthetic, adjustable pore structure, removal rate up to 99%;
5.Safer: resin is a hydrophobic material, no drying operation, can reduce the adsorption heat;
6.Long life: no need to replace the whole, the service life is up to 5 years, the loss is small.
7.Low consumption: desorption is easy, and the steam used in the desorption process is half that of traditional activated carbon.

Waste gas adsorption resin index
Appearance: Brown opaque spherical particles
Water content (%) : 54-65
Wet apparent density (g/ml) : 0.65-0.75
Specific surface area (m'/g) : 21,200
Average aperture (A)(PET method) : 26-32
Pore volume (cm/g) : 0.88-0.90
Particle size range (mm) : 0.6-1.25295%
Service life: 5 years
Equipment Model | Equipment Size, mm | Applicable air volume/airflow (m³/h)CMH | Applicable Concentration, mg/m³ | Equipment Thickness, mm | Max Resin Filling, m³ |
DN1500 | DN1500×2750 | 954~1589 | ≤23000 | 6/6 | 3.5 |
DN2000 | DN2000×3000 | 1695~2825 | ≤23000 | 6/6 | 6.2 |
DN2400 | DN2400×3200 | 2442~4069 | ≤23000 | 6/6 | 9 |
DN2600 | DN2600×3300 | 2865~4776 | ≤23000 | 6/8 | 10.6 |
DN2800 | DN2800×3400 | 3332~5540 | ≤23000 | 6/8 | 12.3 |
DN3000 | DN3000×3600 | 4340~7236 | ≤23000 | 8/10 | 16 |
DN1500 | DN1500×2750 | 954~1589 | ≤23000 | 6/6 | 3.5 |
DN2000 | DN2000×3000 | 1695~2825 | ≤23000 | 6/6 | 6.2 |
DN2400 | DN2400×3200 | 2442~4069 | ≤23000 | 6/6 | 9 |
DN2600 | DN2600×3300 | 2865~4776 | ≤23000 | 6/8 | 10.6 |
DN2800 | DN2800×3400 | 3332~5540 | ≤23000 | 6/8 | 12.3 |
DN3000 | DN3000×3600 | 4340~7236 | ≤23000 | 8/10 | 16 |