Water Based PTFE Non-Stick Coating for Aluminum Fry Pan

Water Based PTFE Non-Stick Coating for Aluminum Fry Pan
  


Technical parameters of Water-based non-stick coating/PTFE coating

For aluminum, stainless steel, iron, etc.
Color: Black or brown, other colors on customer'request.

1. Introduction and Achieved Certificate
This PTFE non-stick paint is double-layered, and has extraordinary characteristics of
Non-stick and anti-corrosion, etc, complying to GB
America FDA standard Germany LFGB standard EU RoHS
2. Technical Parameter:
2.1 curing temperature and time: 10min @380° C or 5min @400° C
2.2 paint thickness: 8-10um prime, 12-17um finished paint, total film thickness of 25um
2.3 Hardness:1H-3H
2.4 viscosity(Lwata No. 2 cup, 25° C): Prime≥ 30 seconds, finished coating≥ 15 seconds.
2.5 adhesive force: Heat in boiled water for 15min, then use griding methods and cross Ten times, check that the film does not peel off.
2.6 salted water resistance: Pour 5% salted water in the non-stick pan, then heat until boiling and last for 8hrs. Do it three times every 16hrs, no bubble appears.
2.7 acid resistance: Put it into the non-stick pan, then heat until
Boiling, and let it boil for 15 min, then leave it for 40min, no bubble appears.
2.8 dry up: Heat for 10 days @220° C, no powdering. (peak value should not exceed 260° C)
2.9 non-stick property: Heat the non-stick pan to 230-240° C, then add the egg onto the
Center of the pan, do not stir up and turn over. Wait until the egg turns white fully, then
Use the fork to peel off the whole fried egg from the side and bottom, the fried egg could
Peel off fully.
3. Storage and Use direction:
3.1 water-based, prevent from freezing.
3.2 stir thoroughly before applying.
4. Package:
20-35kgs/plastic drum.

Other types of water-based non-stick paint for cookware with different parameter offered on your requirements.