Audited Supplier
Water/Fuel Separation Absorbing Sock absorbs water from the bottom of your fuel tanks.
The Water/Fuel Separation Absorbing Sock is a fuel tank water absorber, which has been developed in response to the increasing concerns regarding water contamination of fuel. By checking for, and removing any unwanted water, the Water/Fuel Separation Absorbing Sock reduces the damaging impact that this contamination has on machinery and vehicles.
The Water/Fuel Separation Absorbing Sock, or 'tank sock' as it is often referred to, contains highly absorbent silica gel,
which when lowered into the tank absorbs up to 350ml of water.
1. Anti-static
2. Acid resistance
3. Alkali resistance
4. Accuracy 25um
5. Water-absorbing particles are degradable to H2O and CO2.
Drop Water/Fuel Separation Absorbing Sock/Tank Dryer into your tank. Be sure the cord will allow Water/Fuel Separation Absorbing Sock/Tank Dryer to lie flat on bottom of tank (this is where the water will be). When the Tank Dryer starts to absorb water, it will expand. Until this condition occurs it may remain in the fuel tank, but should be checked in an hour.
Instructions: Tank opening diameter must be 2 inches (5cm) or more
1 Extinguish cigarettes or any other flammable material before opening fuel
2. Be sure diameter of the tank opening will allow the Tank Dryer to be put into and removed from tank easily.
3 Hold the cord and lower the Tank Dryer in the tank.
4. Be sure the cord will allow the Tank Dryer to Lie flat on bottom of tank. (This is where the water will be) Shorten the cord to remove excess slack.
NOTE: The best place to attach the cord is on the underside of the fuel cap.
5. Attach the retrieval cord to allow fuel cap to be replaced, but be available to remove the Tank Dryer when it is full.
6. When the Tank Dryer starts to absorb water, it will expand . Until this condition occurs it may remain in the fuel tank , but should be check in an hour . The Tank Dryer should be checked weekly and replaced every 3 months.
7. Install the Tank Dryer so you don't obstruct the fuel outlet or sending unit.
Important Note: Alcohol-based additives designed to disperse water will reduce the effectiveness of the Tank Dryer.
Established in 1996, Qingdao Alptec Safety Equipment Co., Ltd specialises in the design, manufacture, and supply of high-quality Overfill Protection as well as Static Grounding Systems, Earthing Clamps, Reels and accessories for the chemical, petrochemical, oil and gas and process industries that transport, store, transfer and use flammable liquids, solvents or combustible liquids in hazardous areas.
Alptec is Sinopec and PetroChina's preferred brand and we have secured more than 50% of the market share in China. Internationally we began exporting in 2006 to Germany, Spain, USA, Canada, Australia &New Zealand, Korea, Singapore, Thailand, Vietnam, Mexico, Brazil, South-Africa, India, and many other countries.
1. Excellence in the industry with over 26 years' experience
2. Good reputation
3. High quality guaranteed
4. Competitive factory-direct sale price
5. Prompt Delivery
6. Good after-sales service
7. Accept urgent order
8. We participate overseas exhibitions regularly:
ADIPEC 1-4 November 2010 in UAE
STOC EXPO EUROPE 2012 in Rotterdam
NACS Show 2012 in Las Vegas
STOC EXPO Asia 2014 in Singapore
16th Pakistan Oil & Gas Exhibition - POGEE 2018
STOC EXPO EUROPE 26-28 March 2019 in Rotterdam
OIL & GAS Thailand 09-11 October 2019
9. We are the supplier of famous companies such as
TOTAL SHELL BP PPG JOTUN DUPONT CNPC SINOPEC CNOOC
BR PETROBRAS PANDENOR ADNOC VALE
Q1: How many workers in your factory?
A: 134.
Q2: Could you send me a sample before bulk order?
A: Sure.
Q3: What tests do you do during production?
A: Intermediate tests and finished product tests.
Q4: Is there MOQ for the Water/Fuel Separation Absorbing Sock?
A:10 units.
Q5: How soon can my order be shipped?
A: Usually 3 business days after payment.
