Water Treatment Disinfection Chlorine Dioxide Generator

Place of Origin: Jiangsu, China (Mainland)Model Number: CPF-5000ECertification: ISO9001, CE MarkedEINECS No. 233-162-8CAS NO. 10049-04-4Control: Manual / PLC remote controlModel: verticalPower: Electric
1. CPF-5000E type of Chlorine Dioxide Generator is
-- disinfection machine by chemical method
-- on-site producing concentrated chlorine dioxide solution for disinfection, algae removal, bleaching, deodorization, etc.
-- can dose in negative pressure / positive pressure water pipe
-- dosage can be adjusted automatically by PLC control or manual control.

2. Normal two precursors chemical process : 5NaClO2+4HCl = 4ClO2+5NaCl+2H2O
    Three precursors are available.

3. Usage of precursors:
Sodium Chlorite: 78% Industrial Sodium Chlorite solid and diluted to use
Hydrochloric Acid: 31% Industrial Hydrochloric Acid and diluted to use

4. Features: optimized structural design, good materials choice, good quality, low cost, safe and reliable operation and good applicability.
Economical, reasonable and suitable disinfection solutions can be supplied to our customers according to site conditions and special requirements.
 

1. Operating voltage: AC380 plus or minus 20% / 50Hz or 60Hz2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: PLC remote control                     Flow rate auto-control (option)                     Residual clo2 auto-control (option)                     Low liquid level alarm function                    Timing start / stop function                    Alarm remote transfer