Audited Supplier
SALUS
9003-05-8
(C3h5no)N
Polyacrylamide
71.07n
SALUS
25kg/Bag
standard
China Mainland
3906901000
Product Description
Name:Polyacrylamide(PAM)
Typical Properties
Appearance: White powder
Mesh size: 20max
UL Viscosity, CPS: 4.0~4.5
Solid content: 90min.
Application & Storage
Recommended solution concentrations: 0.1%
Anionic polyacrylamide flocculant is water-soluble polymer, both flocculation and thickening, shear resistance, resistance reduction, dispersion, such as performance, with active groups in molecules, adsorption in the interface, can change the interface state;
Affinity with many substances, adsorption to form hydrogen bonds. Can bridge between adsorption of particles in the water treatment, make several dozens of particles together, and even prompted colloid particles gathered into large pieces of floc, acceleration of particles in the suspension of settlement, to speed up the solution have clarification, promote such as filtering effect.
Product use
1, Industrial wastewater treatment. Especially for pH value is neutral or alkaline, suspended particles in water is large, high concentration, positively charged sewage. Such as steel plants, electroplating factory, metallurgy and coal washery sewage treatment, the effect is remarkable.
2, Treatment of drinking water. Use of this product to deal with raw water, with less reagent dosage, low cost, no secondary pollution, etc.
3, Papermaking additives. Can be used as long fiber papermaking dispersant, dry strength agent, retention and filtration aid and flocculating agent in papermaking wastewater, etc.
4, Can be used in textile, building materials, mineral processing and other industries.
Instructions
1, Usually the product match into a 0.05% to 015% (w/w) solution for later use.
2, Dissolved, it shall make this product evenly dispersed, the stirring help to dissolve.
3, When using, should be used in low hardness of water, avoid using metal material such as easy to affect the dissolving tank, the pool of water quality.
4, Improve the water temperature can accelerate the dissolution rate, but the general water temperature cannot exceed 50 ºC.
Product Packaging
The solid product is packed in Kraft paper bags with inner plastic bags, with each bag containing 25kgs.
Matters need attention
Product easy to moisture absorption, pay attention to moistureproof prevent wet. Stored in a cool, ventilated, dry warehouse.
Typical Properties
Appearance: White powder
Mesh size: 20max
UL Viscosity, CPS: 4.0~4.5
Solid content: 90min.
Application & Storage
Recommended solution concentrations: 0.1%
| Product | Apperance | Molecular Weight | Ionic Charge |
| Anionic Polyacrylamide | Powder | 5-22 Million | 5%-40% |
| Cationic Polyacrylamide | Powder | 5-12 Million | 5%-60% |
| Non-ionic Polyacrylamide | Powder | 5-15 Million | 0%-5% |
Anionic polyacrylamide flocculant is water-soluble polymer, both flocculation and thickening, shear resistance, resistance reduction, dispersion, such as performance, with active groups in molecules, adsorption in the interface, can change the interface state;
Affinity with many substances, adsorption to form hydrogen bonds. Can bridge between adsorption of particles in the water treatment, make several dozens of particles together, and even prompted colloid particles gathered into large pieces of floc, acceleration of particles in the suspension of settlement, to speed up the solution have clarification, promote such as filtering effect.
Product use
1, Industrial wastewater treatment. Especially for pH value is neutral or alkaline, suspended particles in water is large, high concentration, positively charged sewage. Such as steel plants, electroplating factory, metallurgy and coal washery sewage treatment, the effect is remarkable.
2, Treatment of drinking water. Use of this product to deal with raw water, with less reagent dosage, low cost, no secondary pollution, etc.
3, Papermaking additives. Can be used as long fiber papermaking dispersant, dry strength agent, retention and filtration aid and flocculating agent in papermaking wastewater, etc.
4, Can be used in textile, building materials, mineral processing and other industries.
Instructions
1, Usually the product match into a 0.05% to 015% (w/w) solution for later use.
2, Dissolved, it shall make this product evenly dispersed, the stirring help to dissolve.
3, When using, should be used in low hardness of water, avoid using metal material such as easy to affect the dissolving tank, the pool of water quality.
4, Improve the water temperature can accelerate the dissolution rate, but the general water temperature cannot exceed 50 ºC.
Product Packaging
The solid product is packed in Kraft paper bags with inner plastic bags, with each bag containing 25kgs.
Matters need attention
Product easy to moisture absorption, pay attention to moistureproof prevent wet. Stored in a cool, ventilated, dry warehouse.
