Audited Supplier
Waterjet Cutting media Rock Garnet Sand #80
1.Garnet Sand Application
Water jet cutting
Based on garnet abrasive cutting medium, rely on high pressure water jet cutting in basic and
apply in oil (gas) cutting pipe, steel etc. It is a new type, environmental protection, safe way to cut.
Sand blasting
Garnet abrasive's hardness is moderate and have high bulk density.
It have free silica and good toughness .It is the ideal "environmentally friendly" sand blasting materials.
2.Our Garnet Sand
1). Angular sharp, efficient cutting
2). Economical abrasive
3). High purity,low impurity, multiple gravity separation and magnetic separation
4). Environmental health, free of free silicon
Our rock garnet 80 mesh A+ is the highest quality in current China maket, sells well among more than 100 countries customers all over the world.
3.Garnet Sand Physical Characteristics
| Item | Hardness (mohs) | Specific Gravity (g/cm3) | Average Bulk (g/cm3) | Conductivity (/m) | Soluble Salts (ppm) | Chloride Content (ppm) | PH of Aqueous Medium |
| Result | 8.0 | 4.1 | 2.4 | Less than 25 | Less than 100 | Less than 25 | 6.93 |
4.Garnet Sand Normal Package
1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
4. One ton loose in one ton bulk bag.
5. All pakages are lined with waterproof materials.
6. Gnerally, one 20GP container can load 25 tons, 27 tons at most.
We can also package according to costomers' requirements.
5.Garnet Sand Production Technology
Our garnet sand goes through crushing,magnetic separation,washing,drying and screening production procedures.
6.Garnet Sand Detection and Certificate:
7. Company Profile
Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan, Shandong Province, China, which is the daughter company of Honest Horse (CHINA) Holding Limited. We are the manufacturerof abrasive mediafor more than 13 years experience in north China.
Abrasives media we manufacture:
Bearing steel grit
Cast steel grit
Steel shot
Glass beads
Garnet sand
The products reach the ISO9001 standard, SAE J444 standard and always enjoy a good reputation among our customers.
8.Services:
(1) Sample service
If you feel interested in our products sincerely, we can supply 500g sample for free.
(2) Customized Service
Product---We can produce various size abraisves according to the customers' requirements.
Package---The products can be packaged as customers' requirements.
(3) Payment term
T/T 50% advance payment then the rest 50% payment pay us when get the scanned B/L
L/C 100% irrevocable L/C at sight.
We welcome customers all over the world do cooperation with us !
