Audited Supplier
Place of Origin: China
Model Number:GF0302-180XX
Adhesive:Rubber
Adhesive Side:Double Sided
Adhesive Type:Hot Melt, Pressure Sensitive
Design Printing:No printing
Material:fiberglass, Glassine paper
Use:Bag Sealing
Color:Yellow
Custom size:Width 6mm~1020mm
Product Description
Premium Double-sided Filament Tape
Features:
The reinforced fiberglass yarn provides the filament tapes high tensile strength;the PET film backing provides excellent abrasion and moisture resistance. The proper packaging-grade adhesive is specially to provide good initial adhesion & long-term holding power.
| Typical Physical Properties (21 Degree, stainless steel) | Note: Typical data for reference, not for specification purpose.
| |||||||||
| Testing method | ||||||||||
| Face adhesive | 0.095mm( thickness) | |||||||||
| Backing adhesive | 0.095mm( thickness) | |||||||||
| Release liner | 0.075mm | |||||||||
| Total Thickness | 0.265mm | |||||||||
| Peel adhesion at 180°: | 50N/25mm | D 3330 | ||||||||
| Initial adhesion: | 14# | D 3121 | ||||||||
| Holding Power: | >72h | D 3654 | ||||||||
| Elongation: | 8% | D 3759 | ||||||||
Little knowledge for tape application:
1.The laminated adhesion depends on the contact area therefore a proper pressure & time helps improve the adhesion strength.
2.The substrates should be clean without oil, clean using solvents when necessary.
3.The best laminate temperature is room temperature; it becomes hard when temperature approach 0ºC as the adhesive film becomes firm.
