Audited Supplier
CPPL/DPPL
PP, Pes, PTFE
Industry, Food and Beverage, Medicine, Water Treatment
Pleated Cartridge
DOE, 222, 226
Medium Filter
Filterek, OEM
Export Standard Packing
5"-40"
China
8421991000
Product Description
Wholesale 40 Inch Pleated Polypropylene Cartridge Filter with 1 Micron PP Membrane
Except PP pleated cartridges, Filterek also provide other materials includes Polyether-sulfone, PTFE and PVDF pleated cartridges. Generally, the material of inner & outer sheath is material of polypropylene. We also offer totally PTFE construction for some critical application.
Filter Cartridge Code Identification
Seal Model Type
Specification
Certificate
FILTEREK polypropylene pleated filter cartridges is constructed of three polypropylene melt-blown superfine fiber membranes with differed fiber micron, hot spun-melt in the inner & outer polypropylene sheath after pleated and integrated. The filtration area is more than 10 times larger than normal standard depth filter cartridge. When liquid fluctuates, the membrane will cause no influence to removal rating. This is a fixed type of filter cartridge with better depth filtration stability.
Except PP pleated cartridges, Filterek also provide other materials includes Polyether-sulfone, PTFE and PVDF pleated cartridges. Generally, the material of inner & outer sheath is material of polypropylene. We also offer totally PTFE construction for some critical application.
Filter Cartridge Code Identification
CPPL:Polypropylene pleated Filter Cartridges---Nominal Rated
DPPL&EPPL:Polypropylene high grades Filter cartridges---Absolute Rated
SPPL:Slurry-mate Polypropylene Filter Cartridges
CPES:Polyethersulfone Membrane Filter Cartridges
HPES:High-Flux Polyethersulfone Membrane Filter Cartridges
PTGA:PTFE Membrane Filter Cartridges
DPTA:UHP Water Rinsed PTFE Membrane Filter Cartridges
GHTA:Sterilizing grade Filter Cartridges
GHUE:High-temperature Sterilizing grade Filter Cartridges
Seal Model Type
| | |
| | |
Specification
Membrane Material | PP, PES, PTFE |
Support Material | PP |
Endcap | DOE, 222/Flat, 222/Fin, 226/Flat, 226/Fin |
O-ring | BUNA, EPDM, SILICONE, VITON |
Inner Diameter | 28mm |
Outer Diameter | 69mm |
Micron Rating | 0.1um, 0.2um, 0.45um, 1um, 3um, 5um, 10um, 20um, 50um |
Length | 5"~40" |
Certificate
| | | |
