Audited Supplier
UHMWPE/HDPE mats as the temporary roads, avoid the damage to environment and roads, improve the work efficiency, reduce the effect cased on construction site.Temporary works are often particularly slippery due to rain and snow, posing potential hazards to passing pedestrians and vehicles. In addition, under the action of repeated rolling of the steel paving steel plate, the end of the plate will warp and deform. In this way, when passing vehicles are driving, it will not only bring noise pollution to the city, but also cause major safety hazards to pedestrians and vehicles, and correspondingly reduce the service life of the steel support plate.
&.Non-conductive-ideal for use on transmission projects
*Grade two: good, goodperformance
The damage.
| Standard size of extruded road mats | |
| Size(mm) | Color |
| 2440*1220mm | |
| 3000×2000mm | |
| 3000×2000mm | |
| 3000×2000mm | Black,green,blue,yellow and customized requirement is available |
| 5000×1500mm | |
| 6000×2000mm | |
| 6000×2000mm | |
| Test item | Test method | Test result | Single position |
| density | GB/T1033-1966 | 0.96-0.98 | g/cm3 |
| Molding shrinkage | ASTMD6474 | 1.0-1.5 | % |
| Elongation at break | GB/T1040-1992 | 238 | % |
| Tensile strength | GB/T1040-1992 | 45.3 | Mpa |
| Ball indentation strength 30g | DINISO 2039-1 | 38 | Mpa |
| Rockwell hardness | IS0868 | 57 | R |
| Temperature resistance value | 80~-160 | ºC | |
| Support beam strength | IS0179 | 85 | KJ/m |
| Bending strength | GB/T9341-2000 | 23 | Mpa |
| Compressive strength | GB/T1041-1992 | 24 | Mpa |
| Softening temperature | ENISO3146 | 132 | |
| Viscoaverage molecular weight | GB/T1632-2010 | 500 | ×104 |
| Specific Heat Capacity | 2.05 | KJ/(Kg.K) | |
| Impact strength | D-256 | 100-160 | Kj/m3 |
| Thermal conductivity | ISO11358 | 0.16-0.14 | %(m/m) |
| Friction coefficient | PLASTIC/STEEL(WET) | 0.14 | |
| Water absorption | <0.01 | % |
Dezhou Shengtong Rubber & Plastic Co.,Ltd located in Industrial park of Yinhe Economic Development Zone(Huangshan Road),Ningjin county,Shandong province.Focus on the manufacturing,researching and developing of Engineering plastic products,Products mainly cover UHMW-PE board,Dock fender board,Oil cast nylon,PE,PP,PVC board as well as various plastic rod and special-shaped parts. Since our company founded ,a complete,scientific management system was established in the same time,Innovations and breakthroughs have been made constantly in the area of engineering plastic,we have earned official accreditation of ISO9001:2015 Quality Management System. Products in our company belong to High-tech commodity with high additional value and have a great potential for application.These products have being widely used in the following fields:Electric power,steel,ports,docks,coking,coal,paper making,textile,chemical industry,environmental protection etc.Are being exported to many countries and regions around the world. We always take Integrity and Practicability as our business philosophy ,take honesty-based and quality-first as enterprise policy,our company and products have been widely recognized with steady and rapid development,awarded various honors by provincial,ministerial level authorities. Nowadays,we are striving for the aim of becoming wealthy and powerful by industry,building a harmonious society with a good working spirit. Sincerely welcome friends from all walks to visit our company and leave valuable suggestions.
1. Who are we?
We are based in Shandong, China, start from 2008,sell to North America(30.00%),Eastern Asia(10.00%),Mid East(10.00%),Africa(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),South America(10.00%),South Asia(5.00%),Southern Europe(5.00%),Northern Europe(5.00%),Western Europe(5.00%). There are total about 51-100 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
3. What can you buy from us?
UHMWPE SHEET, HDPE SHEET, PP SHEET, TEMPORARY ROAD MAT, OUTRIGGER PAD, etc.
4. Why should you buy from us not from other suppliers?
1. New type production equipment, higher pressing and precision. 2. An independent in-house laboratory, which designated as "THE STATE KEY LABORATORY OF POLYMER MATERIALS ENGINEERING".3.Strict QC system. 4.Has a experienced construction team.
5. What services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,EUR,CNY; Accepted Payment Type: T/T,L/C,PayPal,Western Union; Language Spoken:English,Chinese,Russian
6. How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
7. What can you buy from us?
UHMWPE febder pads; crane outrigger pads; wear-resisting liners; radiation sheilding material; UHMWPE/HDPE parts; HDPE sheets; Light/Heavy duty ground mats; Ice rink products
8. Why should you buy from us not from other suppliers?
We are very confident with our in-house system Also as we produce variety of products used in the same field, the clients can get the variety of product mix under one roof.
9.What services can we provide?
Accepted Delivery Terms: FOB; Accepted Payment Currency:USD Accepted Payment Type: T/T,L/C; If you have any inquiry and interest about our UHMWPE/HDPE Temporary Ground Event Mats Plastic Construction Road Panel, please contact me freely. We are here for you for 24 hours.
