Audited Supplier
ISO9001, CE
Electric Coil
Ni-Cr Wire
Heating Wire
Tubular
6mm, 6.5mm, 10mm, 12mm(Customized)
12-480V(Customized)
100mm to 6000mm(Customized)
1", 1-1/4", 1-1/2", 2", 2-1/2", 3''
-5%-0%
SS304, SS316, Ss310s, Incoloy800, Titaninum
VINSON
Carton or Wooden Box
customized
China
85168000
Product Description
Flange heaters are made using hairpin or bugle type tubular elements using incoloy sheathed elements that are welded or silver-brazed into a pipe or steel flange. Perfectly designed to be mounted in tanks and pressurized vessels, Vinson flange heaters are used for heating liquid mediums or other specific types of liquids, and for heating gases (water, oil, heat transfer fluid, and corrosive solutions).
| Technical Parameter | |
| Voltage | 12V/24V/36V/48V/110V/220V/230V/240V/380V/415V/600V |
| Wattage | Customized |
| Tube diameter | 6mm/8mm/10mm/12mm or customized |
| Immersion length | 200-2000mm |
| Sheath Material | Stainless steel 304, 316L, 310S,Copper, Titaninum, incoloy800, incoloy840 |
| Welded Elements QTY | 1element, 2 element, 3 elements, 6 elements, 9 elements, 18 elements or under customer request |
| Screw Thread size | G / NPT / BSP Thread 1'' 1 1/4'' 1 1/2'' 2'' 2.5'' 3'' |
| Round Flange size | DN50 DN80 DN100 DN120 DN150 DN200 etc |
| Square Flange size | 2.5'' x2.5'', 3'' x 3'' or customized |
| Terminal Cover Material | Stainless steel, Plastic |
Please consider the following factors in order to select the proper flange heater material:
| Sheath Material | Application |
| Stainless Steel304 316L | Light oils , In forced oil circulation loops |
| Stainless Steel304 316L or Copper | Water, Freeze protection, Hotwater storage, Boilerandwaterheaters, Coolingtowers, Solution not corrosive to copper, Food equipment |
| Stainless Steel 316L 310s or Incoloy | Oil, Heavy and non-circulated oils, Solution water, Corrosive solutions, Steam super heating |
| Stainless Steel304 316L | Process water, Soap and detergent solutions, Soluble cutting oils, Demineralized or deionized water |
| Stainless Steel304 316L | Fluid heat transfer media, Tar, High to low viscosity petroleum oils, Asphalt, Wax, Paraffin, Degreasing solvents, Alcohol, Molten salt, Solutions not corrosive to steel |
The following sections will help you select the best flange heater that will meet the requirements of your application.
Applications.
• Hot Water Storage Tanks
• Warming Equipment
• Preheating All Grades of Oil
• Food Processing Equipment
• Cleaning and Rinsing Tanks
• Heat Transfer Systems
• Process Air Equipment
• Boiler Equipment
• Freeze Protection of Any Fluid
Advantages
1. Immersion heaters heating up liquids using direct heat transfer, allows the medium to reach the desired temperature quickly.
2.With minimal maintenance requirements, immersion heaters are an excellent solution to rapid heating in almost any industrial
environment.
environment.
3. Easy installation with flange, over the side, or with screw plug.
4. Easy custom lengths, watt densities,
thermostat control options, and connection fittings.
thermostat control options, and connection fittings.
5. Corrosive resistant immersion heaters are also available.
Order Guidance:
1.What wattage and voltage will be used?
2.What is the diameter and heated length required?
3.What's the heating medium? Water or Oil heating?
4.What is thread flange size?
1.What wattage and voltage will be used?
2.What is the diameter and heated length required?
3.What's the heating medium? Water or Oil heating?
4.What is thread flange size?
