Audited Supplier
| Cell model (NCM) | BCPNE37K | Voltage and capacity | 3.7V 37Ah @ C/3, 23ºC |
| Cell Dimension | 155*8.5*242 mm (without tab) | Weight | 620 ± 10 g |
| Max charge current | 37A @ 23°C / 1C constant | Max discharge current | 111 A @ 23°C / 3C constant |
| Cycle life (±C/3 current) | ≥ 3000 times@ 80%DOD, 23°C | Operating temperature | Charge:0ºC~45ºC Discharge: -20ºC~50ºC |
Charge voltage | 4.2V(CC/CV Mode) | Cut off voltage | 3.0V |
Bestgo Battery makes high quality Li-ion pouch cells which have thin shape for heat passing and internal resistance reduction. The package foil of cells is a type of aluminum and elastic fibers mixed material which comes from Japan based company (Showa). The aluminum improved the heat passing efficiency, the strong elastic fibers make foil has good strength and tolerence. In extreme condition if cells damaged and generated heat and gas, the package foil can be blown up to hold them but not allow any liquid or gas leak out, this is a very nice safety design.
To enhance the safety reliability, we applied an unique step in manufactuing that is arrange all half-made cells in 75 degree Celsius oven for 2 hours as a high temperature tolerence test. Our unique chemistry formula and nice materials will help cells pass the test. Then we promise pouch cells made by us are quality reliable in high temperature condition as we specified. The electrolyte of our pouch cells are semi-solid state which better than liquid type that may have risk of leak out of cell.
We can put pouch cells into battery module frame, then do laser welding on the cell tabs to the metal sheets on battery modules, by that way we can make sure connection is firmly and good for big current pass. Then we build customized soft-link busbars to connect modules with screws. We can put the battery modules inside metal case, then we build the cell volt wires and temperature sensor wires to the multi-pins connector built on the metal case, so you can use them to connect to your BMS system.
EV(Shuttle Bus/Golf Cart):48V100Ah battery pack.
Marine:24V200Ah/48V100Ah battery pack. could be connected in parallel.
RV:24V200Ah/48V100Ah battery pack. could be connected in parallel.
Energy storage for Solar sytem:24V200Ah/48V100Ah battery pack. could be connected in parallel.
Advanced manufacturing technology
Not like traditional organic solvents manufacturing method, Bestgo have cells been made under the nano-level pure water dissolving manufacturing way, which makes benefits for a higher level of quality control, processing optimization and labor saving. This manufacturing method requires much more capital invests in production lines for the fully automatic machines and high precision control equipments. They are acting much better for the key manufacturing steps with full zone monitoring and realtime feedback.
Bestgo have cells been made in those manufacturing process, which can greatly enhance the consistency of cell performance, quality reliability for the longterm use, obtain a quite good production yield ratio and reach environmental friendly, to produce the most advanced vehicle level lithium ion batteries.
We designed the patent modules and softlink busbars to resist high vibration conditions, applied the thermal conductive designs in package structure, use totally sealed metal case for priority, which makes our batteries have high safety reliability when meet very hard conditions.
Over the past 10 years, we have got rich experience in customized services. Our senior engineers will give you the best solution according to your detailed requirements!
We have made many customized battery packs of different specifications such as:
12.8V560Ah
48V52Ah/148Ah/175Ah/222Ah/444Ah/703Ah
111V222Ah
Bestgo Battery Co., Ltd. is an advanced lithium ion battery company which specialized in electric vehicle level Lithium Ion Phosphate based (LiFePO4) batteries and Lithium Nickel Cobalt Manganese Oxide based (Li-NCM) batteries. We are dedicated to offer high power and energy density, long lifespan and ultra safe battery products. Bestgo can offer complete solutions for the li-ion cells, battery modules and finished battery packs. With talent technologies, our batteries have amazing consistency and high reliable performance even after years using. We are dedicated to make the best products for customer.We have CE/UN38.3/MSDS and Sea/Air shipping Certificate for all of our battery.
