Audited Supplier
LLDPE Granules
High Impact Strength
9002-88-4
(C2h4)N
9002-88-4
Linear Low Density Polyethylene/LLDPE
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Film/Cable/Injection Grade
White
0.936g/cm3
1ton
LLDPE
Film Grade
hebeichangsheng
25kg/Bag
7042
China
3901100090
Product Description
Product Number:
LLDPE-222W,MLPE-8060,LLDPE7144,LLDPE8916,LLDPE-7149U,LLDPE-DFDA7042,LLDPE-DFDA9047,LLDPE-DFDA9085,etc.
LLDPE-222W,MLPE-8060,LLDPE7144,LLDPE8916,LLDPE-7149U,LLDPE-DFDA7042,LLDPE-DFDA9047,LLDPE-DFDA9085,etc.
Description:
Linear low-density polyethylene (LLDPE) is a copolymer produced by polymerization of ethylene and α-olefin (such as butene-1, hexene-1)
at low pressure. It is low and medium density polyethylene with short chains branching. LLDPE has a narrow molecular weight distribution.
at low pressure. It is low and medium density polyethylene with short chains branching. LLDPE has a narrow molecular weight distribution.
LLDPE is manufactured by polymerization of ethylene and α-olefin monomers in the presence of catalysts using UCC's Unipol
fluidized-bed technology. The product has strong tensile and impact strength and excellent properties to resist puncture and impact at
low temperatures.
fluidized-bed technology. The product has strong tensile and impact strength and excellent properties to resist puncture and impact at
low temperatures.
Applications:
LLDPE is mainly used for making film, pipes, injection-molding products, blow-molding containers, rotationally-molding products and
wire & cable covering material.
wire & cable covering material.
Packaging:
25kg/bag
| Grades | LLDPE-7149U | MLPE-8060 | LLDPE7144 | LLDPE8916 |
| (2.16kg,190ºC)Melt mass-flow rate,g/10min | 4 | 5 | 20 | 16 |
| Density,g/cm³ | 0.934 | 0.936 | 0.924 | 0.954 |
| Tensile stress at yield,MPa | 12 | 10 | 12 | 20 |
| Tensile stress at break,MPa | 10 | - | 8 | 8 |
| Fish eyes(0.8mm),qty/1520cm² | - | - | - | - |
| Fish eyes(0.4mm),qty/1520cm² | - | - | - | - |
| Haze,% | - | - | - | - |
| Drop-weight dart impact damage,g | - | - | - | - |
| Norminal Tensile Strain At Break,% | - | - | 300 | 100 |
| (210ºC,Al)oxidation induction time,min | - | - | - | - |
| Application | rotationally-molding products | rotationally-molding products | household articles, such as plastic barrels, reusable plastic containers and large injection-molded | household articles, such as plastic barrels, reusable plastic containers and large injection-mold |
| Grades | LLDPE-222W | LLDPE-DFDA7042 | LLDPE-DFDA9047 | LLDPE-DFDA9085 |
| (2.16kg,190ºC)Melt mass-flow rate,g/10min | 1.86 | 1.99 | 0.78 | 0.89 |
| Density,g/cm³ | 0.922 | 0.92 | 0.918 | 0.9196 |
| Tensile stress at yield,MPa | 10.3 | 9.47 | 9.37 | 11.2 |
| Tensile stress at break,MPa | 21 | 14.8 | 24.4 | 24.7 |
| Fish eyes(0.8mm),qty/1520cm² | 2 | 0 | 0 | 1 |
| Fish eyes(0.4mm),qty/1520cm² | 11 | 0 | 0 | 9 |
| Haze,% | 16.3 | 22.1 | 20.6 | 10.1 |
| Drop-weight dart impact damage,g | 116 | - | - | 122 |
| Norminal Tensile Strain At Break,% | - | 451 | 804 | 824 |
| (210ºC,Al)oxidation induction time,min | - | - | 18.4 | - |
| Application | Film | Film | Film | Film |
