Audited Supplier
LRR6-1P-RS485
Low Voltage Circuit Breakers
Manual Type
Normal Type Circuit Breaker
Air
Fixed
MCB
1,2,3,4
Circuit Breaker
Overcurrent Protection
IEC/En60898-1tiec/En60947-2
Overcurrent and Short Circuit
Thermo-Magnetic
1p,2p,3p,4p
1,2,3,4,5,6,10,16,20,25,32,40,50,63A
240/415V~
50/60Hz
6,000A
longroad
120 PCS/Carton Bag
91× 18× 61mm
China
Product Description
1.Model LRR6 series Smart Auto Recloser Application
1.1 LRR6 series smart auto recloser is designed to automatically reclose after the relevant protection device trips when a temporary fault occurs in the power system, so as to improve the reliability of the circuit power supply1.2 It can be widely used in power grid terminal lines, unattended mobile phone base stations, elevators, air conditioners, smart phones, smart homes, smart factories, new energy vehicle charging piles, etc.
2.Model LRR6 series Smart Auto Recloser Characteristics
2.1 It can be matched with MCB or RCD. When the MCB or RCD trips unexpectedly, it does not need to be closed manually, reducing manual maintenance costs, and timely troubleshooting to improve efficiency. 2.2 It can realize remote opening and closing control, timing tasks, and obtain the current switch status through wifi or a platform with RS485 connection.
2.3 Built-in multiple reclosing times, continuous closing failure within a certain period of time can send an alarm signal through the LED indicator light or APP. (for specific time and frequency, please refer to the parameter table)
2.4 Reclosing times and delay time can be set up and adjusted as per request.
2.5 With manual/automatic selection switch and mechanical lock function.
2.6 Used in conjunction with circuit breakers and leakage switches to provide overload, short circuit and leakage protection.
2.7 The working status is indicated by LED etc.
3.Model LRR6 series Smart Auto Recloser Main technical parameters
| Model | LRR6-Wifi | LRR6-RS485 |
| Communication method | Wifi, ZigBee | RS485 |
| Supply terminals | L-N | |
| Rated voltage Ue | AC 230V | |
| Power consumption | AC max.1VA (standby), max.20VA (action) | |
| Supply voltage tolerance | ±10% | |
| Status Indicator | Green LED | Red, green and yellow tri-color LED |
| Trip time | ≤ 1s | |
| Mechanical life | 10000 Cycles | |
| Electrical life | 4000 Cycles | |
| Ambient temperature | -20ºC to +55ºC (-4 ºF to 131 ºF ) | |
| Storage temperature | -35ºC to +75ºC (-22 ºF to 158 ºF ) | |
| Installation | Mounting on 35mm DIN rail | |
| Pollution degree | IP20 | |
| Supply terminal size for cable | Max. 2.5mm² | |
| Dimensions | 91×18×61mm | |
| Compatible Device | MCB (LRM6-63), RCCB, RCBO (LRE6-63, LRE6L-63) (More compatible devices are in development) | |
Remark:The Wifi-type smart module needs to configure the network when it is used for the first time, and the Tuya App needs to be downloaded and installed on the mobile phone. The smart module and the mobile phone are required to be matched under the same wireless network. If the network device is replaced, the smart module needs to reconfigure the network.
4.Description of Automatic, Manual Mode Switches and Mechanical Locksof Smart Auto Recloser
AUTO Mode: Allow remote control (Tuya APP, RS485).
MANU Mode: Remote operation is prohibited
Mechanical Padlock:When the mechanical lock is pulled out, the device will enter the locked state, and the device will not be closed to ensure the safety of on-site maintenance. Press the mechanical lock to restore it.
4.Model LRR6 Smart MCB Technical Parameter
| Standard | IEC/EN60898-1 | IEC/EN60947-2 |
| Protection | Overcurrent and short circuit | |
| Type of trip | Thermo-magnetic | |
| No.of poles | 1P,2P,3P,4P | |
| Rated currents In | 1,2,3,4,5,6,10,16,20,25,32,40,50,63A | |
| Rated voltage Ue | 240/415V~ | |
| Rated frequency | 50/60Hz | |
| Rated breaking capacity | 6,000A | |
| Energy Limiting Class | 3 | |
| Rated impulse withstandard voltage(1.5/50) Uimp | 6,000V | |
| Dielectric test voltage at Ind. Freq.for 1 min | 2kV | |
| Thermal release characteristic | (1.13-1.45) x In | (1.05-1.30) x In |
| Magnetic release characteristic | B: (3-5) x In, C: (5-10) x In | (8-12) x In |
| Electrical life | 8,000 Cycles | |
| Mechanical life | 20,000 Cycles | |
| Contact position indicator | Yes | |
| Protection degree | IP20 | |
| Ambient temperature | -5ºC to +40ºC Max.95%humidity | |
| Terminal connection type | Cable/Pin-type busbar | |
| Max.terminal size for cable | 25mm2 | |
| Max.tightening torque | 2.5N.m | |
| Installation | Mounting on 35mm DIN rail | |
| Connection | From top and bottom | |
