Audited Supplier
Wilo-Stratos GIGA
80m
450m³/H
Motor
Single-Stage Pump
13bar/16bar
Single Suction Pump
Vertical Pump
Verticaljoint Surface Pump
Since Irrigation Centrifugal Pumps
Closed
Cycle
-20 ° C to+140 ° C
DN 40 to DN 200
IP55
0 ° C to+40 ° C
-20 ° C to+60 ° C
Wilo
Wooden Chest
Dimensions comply with DIN EN 733 standard
Germany
Product Description
The Wilo Stratos GIGA high-efficiency pipeline pump with IE5 motor and electronic power regulation device adopts a dry rotor pump structure. Single stage low-pressure centrifugal pump with flange connection and mechanical seal.
Product Description
Summary
Wilo Stratos GIGA is an ideal high-efficiency pump for heating, air conditioning, and refrigeration systems, achieving maximum power with the highest energy efficiency.
Your advantages
Technical data
Product Description
Wilo Stratos GIGA is a single-stage low-pressure pump suitable for heating, air conditioning, and refrigeration systems, especially for buildings with high water delivery head and volumetric flow rate.
Flow range : <450m³/h
Lift range : ≤80m
Max.operating pressure at different fluid temperature : 13bar/16bar
Temperature range : -20ºC~+140ºC
Aplication field :The Stratos GIGA series is mainly used for supplying heating water (according to VDI 2035 standard), cold water, and water ethylene glycol mixtures, and does not contain abrasive substances in heating systems, cold water systems, and cooling systems.
Flow range : <450m³/h
Lift range : ≤80m
Max.operating pressure at different fluid temperature : 13bar/16bar
Temperature range : -20ºC~+140ºC
Aplication field :The Stratos GIGA series is mainly used for supplying heating water (according to VDI 2035 standard), cold water, and water ethylene glycol mixtures, and does not contain abrasive substances in heating systems, cold water systems, and cooling systems.
Wilo Stratos GIGA is an ideal high-efficiency pump for heating, air conditioning, and refrigeration systems, achieving maximum power with the highest energy efficiency.
Your advantages
|
Design
High-efficiency in-line pump with IE5 motor and electronic power adjustment in glanded pump design. Version as single-stage low-pressure centrifugal pump with flange connection and mechanical seal.
Application
The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems.
Equipment/function
Operating modes- Δp-c for constant differential pressure
- Δp-v for variable differential pressure
- PID-Control
- Constant speed (n=constant)
Manual operation level
- Green button and display
Manual functions
- Differential pressure setpoint setting
- Setting the speed (manual control mode)
- Setting the operating mode
- Setting the pump ON/OFF
- Configuration of all operating parameters
- Fault acknowledgement
External control functions
- "Overriding Off" control input
- "External pump cycling" control input (effective only in dual-pump operation)
- Analogue input 0 - 10 V, 0 - 20 mA for constant speed (DDC) and remote setpoint adjustment
- Analogue input 2 - 10 V, 4 - 20 mA for constant speed (DDC) and remote setpoint adjustment
- Analogue input 0 - 10 V for actual value signal from pressure sensor
- Analogue input 2 - 10 V, 0 - 20 mA, 4 - 20 mA for actual value signal from pressure sensor
Signal and display functions
- Collective fault signal SSM
- Collective run signal SBM
Data exchange
- Infrared interface for wireless data exchange with IR-Stick
- Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation
Safety functions
- Full motor protection with integrated trip electronics
- Access disable
Dual-pump management(2 x single pumps)
- Main/standby operation (automatic fault-actuated switchover)
- Pump cycling main/standby operation after 24 hours
- Parallel operation
- Parallel operation (efficiency-optimised peak-load activation and deactivation)
Typekey
Example | Wilo-Stratos GIGA 40/1-51/4,5 |
Stratos | High-efficiency pump |
GIGA | In-line single pump |
40 | Nominal flange diameter DN |
1-51 | Nominal delivery head range in [m] |
4.5 | Orientation value of the rated power P2 in kW |
-R1 | Version without differential pressure sensor |
- Permitted temperature range of the fluid: -20 °C to +140 °C
- Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
- Mains connection:
- 3~440 V ±10 %, 50/60 Hz
- 3~400 V ±10 %, 50/60 Hz
- 3~380 V -5% +10%, 50/60 Hz
Compliance with electromagnetic compatibility without additional measures:
- Interference emission for residential environment according to EN 61800-3:2018
- Interference immunity for industrial environments according to EN 61800-3:2018
- Protection class IP55
- Nominal diameter DN 40 to DN 200
- Max. operating pressure 16 bar up to +120 °C, 13 bar up to +140 °C
Materials
- Pump housing and lantern: EN-GJL-250
- Impeller: PPS-GF40 or EN-GJL-200 depending on the type
- Special version: Bronze CuSn 10 (depending on type)
- Special version: Stainless steel 1.4408 (depending on type)
- Shaft: 1.4122 or 1.4542 depending on type
- Mechanical seal: AQEGG; other mechanical seals on request
Scope of delivery
- Pump
- Installation and operating instructions
Options
- …-L1 variant with bronze impeller (at additional charge)
- …-L4 variant with stainless steel impeller (at additional charge)
- Variant …-R1 without differential pressure sensor
- …-S1 variant with special mechanical seal
