Audited Supplier
01 Section:
01 low-e coating detection uses Japanese Omron optical fiber sensor, which can be applied to different LOW-E glass, and the data can be changed at any time according to the film depth of LOW-E glass of different manufacturers.
02 Section:
The overall material of the 02 washing & drying section is an industrial plate stainless steel shell, and the brush bearing base is a stainless steel base. The brush bearing is a self-aligning bearing with long service life and high precision.
The 02 section brushes are available in soft and hard brush materials, and is equipped with a special coated LOW-E brush. Three hard brushes are in the back and 3 soft brushes are in front.
Section 02, three pairs of six brushes, powered by six independent motors, the link method is coupling, and other manufacturers use belt transmission. Compared with belt transmission, it prevents belt slippage.
The 02-stage cleaning machine adopts a 6-bristle water purification spray system, two-stage cleaning, and there is a stainless steel water baffle in the cleaning chamber to prevent cross-contamination of the brush rotating water flow.
The conveying rubber roller of the 02 washing machine adopts acid and alkali resistant rubber roller, which can automatically adjust the spacing according to different thickness of glass.
The 02 drying zone (air knife room) is equipped with a water mist separation device to eliminate the possibility of floating water mist (oil molecules) when the glass passes through the strong wind pressure splashing water drying zone Bright spot phenomenon.
Section 02 adopts the German Bystronic technology air knife, the air knife distance can be adjusted freely according to the thickness of the glass. Equipped with high-power high-pressure fan (sound-proof box fan)
| Max. glass size | 2500*3500mm | Total power | 45KW (WLBZ2535-C) 40KW(WLBZ2535) |
| Min. glass size | 300*500mm | Working speed | 2-45m/min |
| Single glass thickness | 3-16mm | Washing speed | 2-15m/min |
| Insulating glass thickness | 12-80mm | Overall dimension | 24800*2500*3400mm(WLBZ2535-C) 24300*2500*3400mm(WLBZ2535) |
The 06 section
plate pressing is a servo motor controlled synchronous belt pressing, linear guide rail, ball screw, which can realize automatic pressing, without inputting the thickness of the glass, with its own thickness measurement function.
Synchronous pressing of the private server fully guarantees the parallel pressing of the two boards. For the processing of different sizes of insulating glass, it is equipped with pressing torque function, pressure holding time can also be adjusted according to the size of the glass.
It adopts a human-machine interface touch screen, automatic manual and convenient conversion, and has a single-stage operation function, which can accurately display the operation and fault conditions of the equipment, and is convenient for maintenance.
The aviation plug connection method has strong anti-interference, which is convenient for the installation and maintenance of the equipment.
