Audited Supplier
Full rolling process
MODULE MILL advantages:
1.Speed up, increase production:When rolling Φ6, normal roll speed is 75m/s, one hour production is 57t, used module mill, speed increase to105m/s, one hour production is 78.76t.
2.Reduced alloy composition:Production of fine grain rebar, billet cost decreased 80/t
3.Shorter time to change the roll:Shorter time to change the roll, annual production increased 2,880,000t.
4.Reduce equipment storage:Only one bevel gear box is needed as a reserve, can reduce 4, at $2 million per unit, the reserve can be reduced by $8 million
5.Motor:Main motor power in DC motor reasonable power range, can choose DC transmission scheme, saving investment of RMB 3 million.
6.Energy Saving:According to the field test, the empty power consumption of each mill is as high as 100kw. According to the production of four empty mills, the annual waste of electricity is as high as 2.24 million KWH (7000*8*400=2240000), and the electricity cost is 1.344 million yuan (224000*0.6=1244000).
7.Less Spare Parts:The inventory of roller rings, guide guards and other technological parts shall be reduced by more than 4 million yuan.
Technical Parameters:
| Type | 2 frame Ф200+2 frame Ф150 |
| Rolling Specification | Ф5.0~Ф25mm |
| Rolling Speed | Maximum 110m/s |
| Dimensional Accuracy | ±0.1mm |
| Rolling Temperature | ≥750ºC |
Are you a trading company or a manufacturer?
We are a professional rolling mill manufacturer with 29years of experience supported by the chinese government. We offer tailor made high speed wire rod and bar hot rolling mill product solution and turnkey project.
How many successful projects have you done?
Since 1996, GOYO's products and services have been exported to more than 20 countries and regions, such as China, Malaysia, Russia, Thailand, South Africa, India, Ethiopia, Philippines, Vietnam, Indonesia and so on.
How do you guarantee quality?
Quality is our lifeline.
GOYO has a complete quality assurance system and an excellent quality management team. We insist on pre-production samples before mass production and final inspection and trial operation before shipment;
At the same time, we have obtained the international ISO, BV and SGS quality system certification.
How to get a quote?
Please tell us the following details by email or other means, so that we can recommend suitable plans and layouts to you:
Turnkey project or part of equipment or parts
Raw material (bill or scrap) and its size
Finished product and its dimensions
Whether a furnace is required and what fuel is used
Your planned annual output and working hours
Available factory area
Please let us know if you have any additions or questions.
