

Operation Description:

Locate the radio receiver on the circuit board (Red button, or English written next to it: code or radio)
STEP 2
Press learning button (A) on radio receiver
STEP 3
Press required button on remote handset (B). The remote control handset will transmitthe radio code
to the receiver. Corresponding LED light will go out according to which channel is selected.
STEP 4.
Repeat procedure above to program further remote control handsets.
TO CHANGE THE BATTERY:
Only use type CR2032 battery. Pull out concealed keypad to expose battery. Take outbattery and replace with new one. Always observe correct polarity (+/-)



