Audited Supplier
2014.602H
Waterproof, Dust-Proof
Intelligent
No/COM
Capacitive
Home Appliance, Electronics, Apartment/Villa, Hotel, Commercial, Home
Normal Open
Single Control Switch
Amplifier Separated Type
Start Button
Single-pole on-off Switch
Type c Contact
Retro-reflective Mode
CE
Safedoor
Box
2.4GHZ
China
Product Description
2014.602H Wireless contact-less switch
This wireless non-touch switch uses low power consumption and high sensitivity 2.4G wireless touch. It is widely used in various automatic doors and door control devices, 2.4G radio waves make it strong anti-interference ability, low power consumption. There are wireless and wired options to meet different needs.
Features:
This wireless non-touch switch uses low power consumption and high sensitivity 2.4G wireless touch. It is widely used in various automatic doors and door control devices, 2.4G radio waves make it strong anti-interference ability, low power consumption. There are wireless and wired options to meet different needs.
Features:
- Wireless and wired optional.
- Anti-drop screw fixing design.
- Wireless design, installation free wiring, more flexible installation.
- The receiver has a wide voltage input design, and 12-30V AC and DC power input are effective.
- When the signal is received, the red light will also turn green, you can confirm whether the signal is valid.
- The strip panel adopts a dual-sensing system, the upper part is non-contact, and the lower part is the touch system.
| Technical data: | |
| Model | 2014.602H |
| Support function | Non-touch induction + touch induction |
| Non-touch sensing distance | 20mm |
| Stand-by current | 10.5μA |
| Emission current | 13. 4mA |
| Standby time | 1year |
| Working humidity | ≤90% |
| Ambient temperature | -30°C-50°C |
| Launch frequency | 2.4GHZ |
| Battery | Button battery 3.3V 2 pcs |
| Installation method | Fixed base plate, wireless |
| Wireless distance | 30M |
| Product size | 135MM (H) X36MM (W) X10MM (L) Switch |
| 110MM (H) X30MM (W) X15MM (L) Receiver | |
| Stand-by current | 26mA (DC12V) |
| Power supply | AC/DC12-30V |
| Working current | 74mA (DC12V) |
| Relay contact | 20A DC1 4V |
