Audited Supplier
Cy150
24hours
12 Month After Shipping
Automatic
Drinks
Filling and Sealing Machine
Press
Seal
Electric
Solid
Cartons
Metal
Metal
Bottles
Child-Proof
26mm 38mm 43mm 48mm 53 58 63 66 70 82 100 110custo
Avoid Leakage
Customized Color
stonepack
Standard Export Wooden Package
1400000p/h
China
8422400000
Product Description
CY150 Blanking Press:
The machine is equipped with:
☆Automatic sheet feeder;
☆Sheet waxing rolls with wax metering unit;
☆ Double sheet detector with automatic bypass mechanism;
☆Misprinting electronic detection unit;
☆Sheets centering device;
☆15 dies on a two-rows die set. Blank diameters will be per Buyer's specification.
CY150 Blanking Press:
☆Fail-safe pneumatic clutch/brake unit allowing "inching", "single stroke", and "continuous" operating sequence;
☆Positive "step-by-step" sheets feeding mechanism;
☆Pneumatic/electric controls conveniently located at the press's rear
☆Press shock absorbers (no special foundations are required);
☆Compressed air lubrication and pressure controlling unit;
☆Drive motor;
☆Touch screen programmable logic control unit.
☆Electric interconnections and controls;
Max production: 150,000 crowns/hour
CY150
DMS250
The Complete Line Plane Layout
The machine is equipped with:
☆Automatic sheet feeder;
☆Sheet waxing rolls with wax metering unit;
☆ Double sheet detector with automatic bypass mechanism;
☆Misprinting electronic detection unit;
☆Sheets centering device;
☆15 dies on a two-rows die set. Blank diameters will be per Buyer's specification.
CY150 Blanking Press:
☆Fail-safe pneumatic clutch/brake unit allowing "inching", "single stroke", and "continuous" operating sequence;
☆Positive "step-by-step" sheets feeding mechanism;
☆Pneumatic/electric controls conveniently located at the press's rear
☆Press shock absorbers (no special foundations are required);
☆Compressed air lubrication and pressure controlling unit;
☆Drive motor;
☆Touch screen programmable logic control unit.
☆Electric interconnections and controls;
Max production: 150,000 crowns/hour
CY150
| The main technology parameter | |||
| Total pressure force | 190 KN | Blanked sheet per minute | 8~9 |
| Total stretch force | 177 KN | Number of caps per hour | 150,000 |
| The power of press motor | 5.5KW | Stroke of upper slide | 74mm |
| Total installed power | 9.05KW | Stroke of lower slide | 36mm |
| Total absorbed power | 5.5KW | Machine total weight with die | 60KN |
| Number of strokes per minute | 172 | Weight of die | 3.9 KN |
| Pressure of compressed air | 0.7Mpa | Compressed air consumption | 0.5Mpa |
| Max. metal sheet stack height | 605mm | | |
DMS250
- Crown caps lining machine ModelDMS250
- Automatic crown caps lining machine suitable for extruding PVC or PVC-FREE dryblend materials (PVC-FREE liner production will require a separate change-over kit), metering and cutting it into pellet, inserting the pellet into the cap and cold molding it to a fixed sealing gasket profile:
- Crowns feeding hopper with crowns alignmentdevice;
- "No crown/no compound" controlsystem;
- Compound extruder controlled by a A.C. motor and reduction gear withautomatic speed control;
- Compound by-pass valve;
- Extruder temperaturecontrol;
- Radio-frequency induction unit for crownheating;
- Compound insertingturret;
- Liner molding turret with temperature controldevice;
- Gasketsealingautomaticcontrolunitwithdefectivecrownsejectionunit;
- Out-going crowns counter, with automatic switching from a full carton to an emptycarton;
- Safetyguards;
- Electric controls and touch screen programmableunit;
- Motors, pumps, temperature and speed fully controllable and set from thescreen;
The Complete Line Plane Layout
