Audited Supplier
WJ-1
Remote Maintenance
1 Year
6200*1300*1950
58 Kw/73.5/84kw
4500mm
6.5t
50kN
45kN
4t
1000mm
840mm
3000mm
190mm
±8°
2t
2t
HongKe
Ocean Shipping
See Details
Shandong China
842951
Product Description
Products Description
The main pump and motor of the WJ-1 diesel scooptram are origin al imported parts, using the original German DEUTZ engine as the output power, reduce d the pollution emissions. And the hinge was changed to a slewing support, which changed the a rrangement of the swing stand and three-point suspension hinge of the old model, overcomes the sh ortcomings of swing stand has high failure rate, maintenance trouble, serious safety hazards, greatly reduced investment in manpower and material resources, makes driving more fl exibly and effi ciently. he walking system adopts full hydraulic control operation, makes the scooptram more responsiv e. The working system adopts a pilot hydraulic control system, making the operation easier. In terms of safety performance, it integrates working brake, parking brake, and emergency brake. I t is suitable for mining underground and tunnel excavation and slag removal, as well as auxiliary op erations such as leveling work sites and roads, material transportation, etc.
·The multi-functional mining standardized operation table retains the best mechanical quality, easy to use, safe mining, high efficiency and energy saving.
·The combination of traditional and modern swing support structure, more durable, luxurious cockpit balance operator comfort and safety.
| Parameter | Value | Unit | |
| Bucket Capacity (Heaped) | 1 | m3 | |
| Rated Load Capacity | 2 | t | |
| Maximum Traction Force | 50 | kN | |
| Maximum Breakout Force | 45 | kN | |
| Maximum Unloading Height | 1000 | mm | |
| Minimum Unloading Distance | 840 | mm | |
| Maximum Lift Height | 3000 | mm | |
| Minimum Ground Clearance | 190 | mm | |
| Angle Of Oscillation(Rear Axle) | ±8 | ° | |
| Steering Angle(Left and Right) | - | ° | |
| Lifting Capacity | 2 | t | |
| Maximum Payload | 4 | t | |
| Minimum Turning Radius(Outside) | 4500 | mm | |
| Minimum Turning Radius(Inside) | - | - | |
| Maximum Gradeability | 12 | ° | |
| Attachment Operating Time | 18 | s | |
| Wheelbase | 2250 | mm | |
| Track Width | 1300 | mm | |
| Gross Vehicle Weight (GVW) | 6.5 | t | |
| Maximum Speed (Loaded) | gear | 10 | km/h |
| Transportation State Dimensions | Length | 6200 | mm |
| Width | 1300 | mm | |
| Height | 1950 | mm | |
| Tire | Model | 10.00-20 | |
| Motor | Power | 58 kW/73.5/84KW | |
Hongke Machinery's factory is located in Shandong, China. If you are unsure, we sincerely invite you to visit our factory. Additionally, we offer a 2-year after-sales warranty and remote maintenance support for our products.
1.Who are we?
We are source factory manufacturers from Jinan, Shandong Province.
2.Will you provide some wearing parts of your products?
Yes, of course.If you need, we will provide with the products.
3.How about the quality of your products?
We have passed ISO, KA certification, products in line with national and international standards, our products are guaranteed.
4.what services can we provide?
We accept L/C,T/T and D/P etc,T/T goes with 30% advanced payment after signing contract or order confirmation.
5.Can your products be customized?
Of course ,we can do anything.
