Audited Supplier
CFRTP fiberglass Flat Sheets
5 Years
Continuous Fiberglass Thermoplastic
Color Plastic Sheet
＜0.01%
＜0.4%
51~80MPa
Thermoplastic
High Tensile Strength
Cfrt Thermoplastic Laminated Plate
Van Panels Skin, Container Liner Boards
Anti-UV, Anti-Aging Film, Nonwoven, Decorative Film
Bending, Decoiling, Moulding, Welding, Punching
Strong Strength, Lightweight, Recyclable
200 Square Meters
Natural, Black, Customized
PP, PE etc
Glassfiber, etc
0.4-10mm
Max.2800mm
lusafe
Cfrt Plastic Plate Packed as Per Request
Cfrt Plastic Plate size as per request
China
392190
Product Description
Wood Grain CFRTP fiberglass Flat Sheets for RV Trailer Caravan Siding Decoration
In short, what we could provide:
(Click on the name below to reach the corresponding product link)
| 1 | Continuous Fiberglass Reinforced Thermoplastic products, including --Unidirectional tapes --laminate sheet --Honeycomb sandwich panel --Foam Core sandwich panel etc. |
| 2 | Machinery line, which could produce the above products |
| 3 | Factory construction guidance, from 0 to a functioning factory. |
Application fields of the CFRT Laminates
1. Automotive field:
Used for inner and outer panels of refrigerated vehicles, logistics transport vehicle panels, and honeycomb panel skins.
After multi-layer compounding and heating, they are pressed and formed by molds and pressed into automotive front-end modules, automotive interior parts, etc.
2. Sports equipment:
The surface of scooters is enhanced, and paddles, sleds, etc. have been used in batches.
3. Labor insurance products:
Through the molding process, after heating, they can be molded into safety shoe toes, safety helmets, and soles of high-end sports shoes and casual shoes.
4. Flame-retardant panels:
used for molded products such as high-speed rail guards, auto parts, building formwork, home furnishing, etc.,
where flame-retardant requirements are required.
1. Automotive field:
Used for inner and outer panels of refrigerated vehicles, logistics transport vehicle panels, and honeycomb panel skins.
After multi-layer compounding and heating, they are pressed and formed by molds and pressed into automotive front-end modules, automotive interior parts, etc.
2. Sports equipment:
The surface of scooters is enhanced, and paddles, sleds, etc. have been used in batches.
3. Labor insurance products:
Through the molding process, after heating, they can be molded into safety shoe toes, safety helmets, and soles of high-end sports shoes and casual shoes.
4. Flame-retardant panels:
used for molded products such as high-speed rail guards, auto parts, building formwork, home furnishing, etc.,
where flame-retardant requirements are required.
The CFRT laminates, which is a solid board formed by Orthogonal layering of continuous fiber-reinforced polypropylene unidirectional tape.
CFRT composite multi-layer boards are laminated by the XY method and hot-melt composite molding process, which can produce boards between 0.6mm and 6mm and can be directly formed without adding auxiliary materials such as glue.
According to customers' requirements, can be laminated with a bonding layer, anti-UV protective film, decorative layer, etc. on both sides of the board.
CFRT composite multi-layer boards are laminated by the XY method and hot-melt composite molding process, which can produce boards between 0.6mm and 6mm and can be directly formed without adding auxiliary materials such as glue.
According to customers' requirements, can be laminated with a bonding layer, anti-UV protective film, decorative layer, etc. on both sides of the board.
Product advantages:
High-strength, low-density, environmentally friendly, recyclable, high impact strength, strong surface design, can replace glass steel plate application.
Application fields:
Replace FRP panels for refrigerated trucks, containers, RVs, cold storage, and other scenarios;
High-strength, low-density, environmentally friendly, recyclable, high impact strength, strong surface design, can replace glass steel plate application.
Application fields:
Replace FRP panels for refrigerated trucks, containers, RVs, cold storage, and other scenarios;
The product has high strength, corrosion resistance, and no water absorption. It can replace steel in some construction applications. It has a light-specific gravity and a density of about 1.5, which is only one-fifth of steel. 5mm thick CFRT can be used in construction as a perfect replacement for aluminum formwork planes, and it is easy to remove the mold without applying a release agent.
Could be used for van panels skin, container liner boards, car interior and exterior trim, construction framework, freight train roof, safety toe, sports equipment, etc.
Could be used for van panels skin, container liner boards, car interior and exterior trim, construction framework, freight train roof, safety toe, sports equipment, etc.
We are ready to supply the laminates as follows:
Laminate thickness: 0.4mm-10mm
Laminate width: 0-2800mm
Color: Natural and black, other colors as per request
Surface: can be laminated with anti-UV, anti-aging film, as well as nonwoven, decorative film.
Laminate width: 0-2800mm
Color: Natural and black, other colors as per request
Surface: can be laminated with anti-UV, anti-aging film, as well as nonwoven, decorative film.
| Technical Data Sheet of the CFRT Laminates | |||
| Properties | Units | SX12-P1OWH/W | SX15-UV/P12/W |
| Thickness | mm | 1.2 | 1.5 |
| Surface weight | g/m" | 1400 | 1900 |
| Tensile Strength 0° | MPa | 290 | 310 |
| Elongation at Break 0° | % | 2.00 | 2.50 |
| Tensile Modulus 0° | GPa | 17 | 13 |
| Tensile Strength 90° | MPa | 200 | 300 |
| Elongation at Break 90° | % | 2.50 | 3.00 |
| Tensile Modulus90° | GPa | 9 | 13 |
Packed on plywood pallet or Packed in plywood case, as per request, could be cut in different size and shape as per request.
CFRT UD TAPES CFRT Honeycomb Panel CFRT Foam Panel
We could also supply the CFRT tape equipment
and the Factory construction guidance, from 0 to a functioning factory.
and the Factory construction guidance, from 0 to a functioning factory.
