Audited Supplier
2 Years
Extrusion
Soft
Opaque
Printing
PVC +PMMA, PVC + PVDF
1260mm, 630mm
0.18mm
Golden Oak, Walnut, Macore, Anthracite Grey
Greenwood
Wooden Boxes
0.18mm
China
3920430090
Product Description
Three "W" for our exterior foil
(why we produce it, how we produce it, what we could provide to our clients)
Qingdao Greenwood New Decorative Materials Co., Ltd. is one of the leading manufactures of PVC laminating films and hot stamping foils, it has
more than 15 years experience since the founder entered into this industry in 1999.
With the deands from markets & our old clients for the exterior foil, we studied & learned the producet from Germany; with about 3 years, we finally
have our own product and finished the test in German SZK lab.
The weathering time on our exterior foil from lab is 12,000 hours, on basis of this data we could provide an pfficial10-year exterior use guarantee for it. .
Most of the designs follow brands like Renolit, LG or skai (same structures, same raw material and same tests methods)
Baisc tecnical data for the exterior foil:
Tests on exterior film:
1,Completion of Artificial Weathering Test
By using the UV light to test color stability of the foil,
Up to an irradiation does of 12GJ/m2,according to EN513
2,Water & Moisture Resistance
Completion of Artificial Weathering Test (18min spray condition)
Low moisture absorption, excellent quality stability
3, Energy Efficiency
Material resistance against infrared rays applied to lower surface temperature of laminated profile, then add the weather resistance, and longer life time.
Designs that are popular in market
Features:
1, rich in color, strong texture sense, customized cutting shape
2, air-slot contained
There are air-slots in the self-adhesive glue, so no bubble problem appears when laminating.
3, convenient and efficient
The only requirement is a slight of primer, then a hand-laminating could be applied.
4, high weather ability
With test condition 60% humidity, 20 degrees below zero for four hours, then 80 degree for 4 hours, and after a 192-hour recurring thermal shock test, no bubble, no wrinkle and no shedding
package of the exterior foil:
into PVC foam paper then into wooden boxes
(why we produce it, how we produce it, what we could provide to our clients)
Qingdao Greenwood New Decorative Materials Co., Ltd. is one of the leading manufactures of PVC laminating films and hot stamping foils, it has
more than 15 years experience since the founder entered into this industry in 1999.
With the deands from markets & our old clients for the exterior foil, we studied & learned the producet from Germany; with about 3 years, we finally
have our own product and finished the test in German SZK lab.
The weathering time on our exterior foil from lab is 12,000 hours, on basis of this data we could provide an pfficial10-year exterior use guarantee for it. .
Most of the designs follow brands like Renolit, LG or skai (same structures, same raw material and same tests methods)
Baisc tecnical data for the exterior foil:
structure & sizes | 1, structure: PVC + PMMA or PVC +PVDF 2, thickness: 0.18mm width: 1260mm or 630mm; length: around 500m/roll |
| thickness for PMMA | ≥53μm |
| Resistance to the environment | Meets the requirements of RAL - GZ 716 (1 section 1, Part 7), on the basis of artificial climatic tests carried out in accordance with DIN EN 513 at a dose of light irradiation 16 GJ / m². The film is suitable for use after 11,000 hours of irradiation with UV-rays UV-A lamps in a climatic chamber QUV device at a wavelength of 340 nm in accordance with ASTM G53. |
| Thermal stability | Embossing, color and luster of the material does not change during short-term exposure to high temperatures (100 ° C - 10 min) or under the influence of moderate temperature (65 ° C - 24 h). |
Shrinkage | Max. 4 at 100 ° C for 10 min .; Max. 2.5 at 60 ° C for 10 min |
| applications | U-PVC profiles, exterior floors, exterior wall panels & PVC fences |
| Tensile strength | When you break the length and breadth of 100 mm / min DIN 53377 - not less than 20 N / mm ². |
Chemical resistance | No resistance to organic solvent, organic solution contained materials, or products contains organic solvents such as paint thinner, paint remover, polish or adhesives Resistance to normal household cleaning agent, as well as to petrol, motor oil, olive oil and milk |
Tests on exterior film:
1,Completion of Artificial Weathering Test
By using the UV light to test color stability of the foil,
Up to an irradiation does of 12GJ/m2,according to EN513
2,Water & Moisture Resistance
Completion of Artificial Weathering Test (18min spray condition)
Low moisture absorption, excellent quality stability
3, Energy Efficiency
Material resistance against infrared rays applied to lower surface temperature of laminated profile, then add the weather resistance, and longer life time.
Designs that are popular in market
Features:
1, rich in color, strong texture sense, customized cutting shape
2, air-slot contained
There are air-slots in the self-adhesive glue, so no bubble problem appears when laminating.
3, convenient and efficient
The only requirement is a slight of primer, then a hand-laminating could be applied.
4, high weather ability
With test condition 60% humidity, 20 degrees below zero for four hours, then 80 degree for 4 hours, and after a 192-hour recurring thermal shock test, no bubble, no wrinkle and no shedding
package of the exterior foil:
into PVC foam paper then into wooden boxes
