Audited Supplier
- The fuselage is made of high-strength steel plate, with exclusive welding process to ensure the fuselage stable without deformation, and pursue continuous improvement!
2. The guide rail of conveyor belt is made of investment casting, which is wear-resistant and smooth without deformation
3. The transmission motor adopts Taiwan joint venture brand.
4. All high-speed motors adopt famous and reliable brands, which are prosperous, efficient and stable
5. The guide rail is made of Taiwan brand, stable and durable
6. Air system, bailing brand
7. Electrical system, Chint or Delixi: air switch, contactor, Japan Omron travel switch,
8.Taiwan delta controller and delta touch
9The crossbeam hanging plate is made of aluminum
Machine details
Function:Pre-heating ,gluing,end cutting ,rough trimming ,fine trimming , Corner rounding ,scraping ,buffing
| Edge tape width | 12-55mm |
| Edge tape thickness | 0.4-3mm |
| Workpieces thickness | 10-50mm |
| Min workpiece length | 120mm |
| Min work piece width | 80mm |
| Feeding speed | 11-17m/min |
| Total power | 10.8kw |
| Air pressuer | 0.6MPa-0.8Mpa |
| Gluing pot heating power | 1.5kw |
| Board preheating power | 0.15kw |
| Gluing box transmission power | 0.375Kw |
| Conveyor motor power | 2.2Kw |
| End cutting motor power | 0.5Kw*2 12000rom/min |
| Rough trimming motor power | 0.7Kw *2 |
| Fine trimming motor power | 0.7Kw*2 18000rpm/min |
| Buffing motor power | 0.18Kw*2 |
| Corner rounding motor power | 0.55KW*2 pcs |
| Net weight | 1300Kg |
| Machine dimension | 5300*900*1700mm |
This machine is mainly used plywood, fiberboard, and Dimensional cross-section of particle board straight structure Edge. It is compact structure, reasonable layout and aesthetic appearance; Usage of sound insulation, Dust collection port, anti-overload devices; It has edge banding, the upper and lower trimmer, surface polishing work unit; It is a new, multifunctional, straight edge banding machine, which is very popular in woodworking furniture factory of all ages
