Audited Supplier
DEZ550A
Two Years
Pre Milling, Gluing, Edge Banding, End Trimming, Rough Trimming, Fine Trimming, Contour Tracking, Scraping, Buffing
Straight Line
0.4-3mm
Automatic
15-23 M/Min
CE, ISO
10-60mm
100mm
80mm
Glue Tank Underneath
Customized
Two Years
0.6-0.8MPa
14.64kw
2660kg
380V 50Hz 3phase (Optional)
Acceptable
Within 10 Days After Paid
New
Yes
Yes
DEZMAG
Plywood Case
6970*1000*1600mm
China
84659400
Product Description
DEZ550A edge banding machine
DEZ550A edge banding machinecan be used for edge banding of MDF board, Plywood, Solid Wood, Chipboard (Melamine laminted) and the Glazed board ( prefer to add the PUR glue system).
| Feed speed | 15-23 m/min |
| Edge banding tape thickness | 0.4-3 mm |
| Panel thickness | 10-60 mm |
| Panel Length | ≥100 mm |
| Panel width | ≥80 mm |
| Working air pressure | 0.8 mpa |
| Motor power | 14.64 kw |
| Voltage | 380 V 50Hz 3Phase (Optional) |
| Weight | 2660kg |
| Dimension | 6970×1000×1600mm |
FAQ:
1. What's your guarantee? Which type after sale service can you provide to us?
All the machine, we can offer the 2 year guarantee to our customers; any parts damaged due to the quality issue, we will send the parts via DHL, Fedex or air shipment urgently.
After sale service: if you purchased our CNC nesting center or edge bander, and we don't have any dealer or agent in your region, we will send our engineer to your site for installation and training ( you should pay the round-trip flight ticket, salary of engineer- each day 100.00USD, also take charge of the local accommodation. ). Considering the situation, we can do the online training. Also any small issues, you can knock us online, we will offer the rapid action to your concerns.
2. Which type payment term can you accept? How could we keep our capital safe?
We can accept the T/T and L/C at sight. We have more than 20 years exporting experience, so we know more about the capital safty concern of our customer. We will offer the video call or pictures to your side, during our loading, then you can check what we have done for the loading, if any cheating, then you can control your payment (T/T or L/C).
3. What is the leading time, if we did the payment to your side?
The leading time of most common machines, will be 10-25 days after collecting the down payment / copy of L/C. Specially designed production will take little bit longer time.
4. Can you accept some O.E. M service to us? or any other service could you do for us?
We have more than 20 years experience in the woodworking machinery industry, also have more than 10 experienced engineers, so we can do the special design according to your requirement.
Also, our exporting team has more than 20 years of experience in this field, so they can help you to purchase relevant products, parts, or tools, which can save your time and your cost.
