Audited Supplier
Cable outer sheath fault pinpoint locator
Cable sheath fault locator can quickly and accurately find hidden dangers such as ground faults and excessive leakage current of the outer sheath of 10kv-500kv single-core and three-core high-voltage and ultra-high-voltage cables. The outer sheath is subjected to a DC withstand voltage test of 5kv-10kv for 1 minute.Through the step voltage method and the clamp current method, the special identification signal converted by the 220VAC full wave rectifier is applied to the cable through the connecting wire for positioning, and then the cable fault is accurately found.
It is a special instrument necessary for the maintenance of cable equipment of 10kv-500kv single-core and three-core high-voltage and ultra-high-voltage cable operation units, ultra-high-voltage cable engineering companies, and power transmission and transformation engineering companies.
Main Features:
The step voltage method and the clamp current method are mainly used for the precise location of the fault of the outer sheath of the single-core cable, and the precise location of the ground fault of the unarmored wire and cable.
★Main features: adjustable voltage, adjustable frequency, overcurrent protection, fixed-point, withstand voltage one-key switch, no blind zone in the test range, adjustable receiver sensitivity, signal frequency adjustment, zero protection.
1. Input voltage: 220V (1±10%), 50Hz (1±5%)
2. Output voltage: 0~10kV (square wave) adjustable
3. Output current: max200mA
4. Output capacity: 2kVA
5. Frequency adjustment: Min: 0.4 Hz, Max: 1 Hz (adjustable range)
