Audited Supplier
XHW05L
Industry
Worm and Wormwheel
IP67
Ball Valves, Butterfly Valves, Dampers and etc.
Silver Grey or Customization
IP65 or IP68
-20ºC to +120ºC
Cast Iron
Manual Operation
XBURS
Plywooden Case
Wenzhou, Zhejiang, China
8483409000
Product Description
XHW05L Part-Turn Worm Gearbox
Features
1.Small in volume, light in weight, reasonable design.
2. Strong in output, labor saving, high mechanical efficiency.
3. With high efficeient needle roller bearing.
4.Stroke 0°- 90° (±5°) , can be adjusted within 5° at position in open and close.
5. The output flange accords with standard ISO5211.
6.The grease has been loaded before leaving factory.
7. Good seal for waterproof.
Application
XHW part turn worm gearboxes are applied to dampers, ball valves, butterfly valves and also other 90° quarter turn valves. RHW part turn worm gear operator has variety models of hand wheel for optional.
Introduction
XHW series Part-turn Gearboxes use worm and worm wheel revolute pairs, with high performance needle roller bearing assembled on both ends of the worm shaft. It ensures the thrust requirement during rotation. It's in high mechanical efficiency withstands big torque, small size with compact design, and it's also easy to operate and has reliable self-locking function.
Connect with valve
The flange connecting to valve is according to ENISO5211 or DIN3210(Customization)
Main Products
Worm gearbox, bevel gearbox, valve gear box, worm gear operator, worm gear actuator, valve worm gear, valve gear operator, valve gear actuator, valve actuator
Gear Operator, Valve Gearbox, Worm Gearbox, Gearbox, Speed Reducer, Part-turn Worm Gearbox, Worm Gearbox Supplier, High Quality Worm Gearbox, Gearbox manufacturer
| Model | XHW05L |
| Output Torque (N.m) | 500 |
| Ratio | 40:1 |
| Input Torque (N.m) | 46 |
| Flange | F07/F10/F12 |
| Max stem (mm) | Φ32 |
| Input Shaft (mm) | Φ15 |
| Reference weight (kg) | 5 |
| Handwheel (mm) | 200 |
| Optional | Round hole/ square hole/ special shaped hole |
| Operating temperature | -20ºC to +120ºC Specific requirements can be submitted |
| Protection grade | IP67 Optional IP65/ IP68 |
| Painting color | RAL5017 or Customization |
| Main Material | Housing: Ductile Casting Iron; Worm gear: Ductile Casting Iron, Worm: steel |
Features
1.Small in volume, light in weight, reasonable design.
2. Strong in output, labor saving, high mechanical efficiency.
3. With high efficeient needle roller bearing.
4.Stroke 0°- 90° (±5°) , can be adjusted within 5° at position in open and close.
5. The output flange accords with standard ISO5211.
6.The grease has been loaded before leaving factory.
7. Good seal for waterproof.
Application
XHW part turn worm gearboxes are applied to dampers, ball valves, butterfly valves and also other 90° quarter turn valves. RHW part turn worm gear operator has variety models of hand wheel for optional.
Introduction
XHW series Part-turn Gearboxes use worm and worm wheel revolute pairs, with high performance needle roller bearing assembled on both ends of the worm shaft. It ensures the thrust requirement during rotation. It's in high mechanical efficiency withstands big torque, small size with compact design, and it's also easy to operate and has reliable self-locking function.
Connect with valve
The flange connecting to valve is according to ENISO5211 or DIN3210(Customization)
Main Products
Worm gearbox, bevel gearbox, valve gear box, worm gear operator, worm gear actuator, valve worm gear, valve gear operator, valve gear actuator, valve actuator
Gear Operator, Valve Gearbox, Worm Gearbox, Gearbox, Speed Reducer, Part-turn Worm Gearbox, Worm Gearbox Supplier, High Quality Worm Gearbox, Gearbox manufacturer
(XHW05)
