Audited Supplier
XZC57BL100S15-433-R55-001A
Universal, Industrial, Household Appliances, Power Tools
Adjust Speed
Compound
Driving
Protection Type
4
Brushless
Z4
Xzc Motor
XZC MOTOR
Boxes
China
Product Description
This brushless dc gearmotor is 57mm(Motor base)*100mm(motor length),which is apply to textile machine,medical device,machine tool spindle ,and oyher elctromechanical device.
The motor can be stepless speed adjusted,and high efficient working.The work long life can be 20000hours.
Our factory can product 300 pus motors per day.We have strict quanlity mangement for the production,and we have excellent after-sales service for every cusomer.
If you need the motor with special
design,we can produce the motor as your requirements.
Motor picture:
General Specification:
Dlmension(Unit:mm)
Electrical Spec:
Prequently asked question
1.Problem:The motor can not working.
Answer:The motor's connenction is wrong,please check the connecting and connect the right wires to the drivers.
2.Problem:The motor do not run with the load and the driver give an alarm.
Answer:The load is exceed the rated torque of the motor.
3.Problem:The noise is high and the motor runs quaveringly.
Answer:The assembling of the motor to the machine is not right,or the load dynamic balance is not good.
4.Problem:The speed of the motor is lower or higher than the speed of your requirement.
Answer:Maybe the load of your machine is not same to the rated torque of the motor.You can choose the high torque of the motor and rudece
the speed by bldc motor driver.
The motor can be stepless speed adjusted,and high efficient working.The work long life can be 20000hours.
Our factory can product 300 pus motors per day.We have strict quanlity mangement for the production,and we have excellent after-sales service for every cusomer.
If you need the motor with special
design,we can produce the motor as your requirements.Motor picture:
General Specification:
Dlmension(Unit:mm)
Electrical Spec:
Prequently asked question
1.Problem:The motor can not working.
Answer:The motor's connenction is wrong,please check the connecting and connect the right wires to the drivers.
2.Problem:The motor do not run with the load and the driver give an alarm.
Answer:The load is exceed the rated torque of the motor.
3.Problem:The noise is high and the motor runs quaveringly.
Answer:The assembling of the motor to the machine is not right,or the load dynamic balance is not good.
4.Problem:The speed of the motor is lower or higher than the speed of your requirement.
Answer:Maybe the load of your machine is not same to the rated torque of the motor.You can choose the high torque of the motor and rudece
the speed by bldc motor driver.
