Audited Supplier
YX18-76.2-762
Colored Steel
CE, ISO
New
Customized
Roof, Wall, Floor
Motor Drive
0.4mm--0.8mm
550MPa
LIMING MACHINERY
40gp*1
13T
Fujian, China (Mainland)
Product Description
YX18-76.2-762 COLD ROLLING MILLS FOR ROOF
Material: 0.4mm-0.8mm thickness
0.5mm thickness is for inspection, common use
Effective width: 762±6mm
Feeding width: 940mm
Prepainted steel; Yield strength: 550Mpa
Machine Components
a.5Ton*1250mm Hydraulic un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Automatic stopping device, Load capacity = Max.5Tons
Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm
b. Entry Bench & Manual Pre-shearing device (Un-powered)
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm
c. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving, 20-step to form
New stand frame design.
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/ф95mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Max. Line speed of roll former: Approx. 15 m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
d.Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material: Cr12, Heat treatment
Hydraulic Group, Pump motor =4KW
e. PLC Control System
Control the quantity & cutting length automatically
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron), etc
Terms Of Trade
Material: 0.4mm-0.8mm thickness
0.5mm thickness is for inspection, common use
Effective width: 762±6mm
Feeding width: 940mm
Prepainted steel; Yield strength: 550Mpa
Machine Components
a.5Ton*1250mm Hydraulic un-coiler
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Automatic stopping device, Load capacity = Max.5Tons
Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm
b. Entry Bench & Manual Pre-shearing device (Un-powered)
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.8mm
c. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving, 20-step to form
New stand frame design.
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/ф95mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Max. Line speed of roll former: Approx. 15 m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
d.Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material: Cr12, Heat treatment
Hydraulic Group, Pump motor =4KW
e. PLC Control System
Control the quantity & cutting length automatically
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
Control Voltage 24V
f.Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free.
The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free.
The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required
before the machine be send out of factory.
Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required
before the machine be send out of factory.
