Audited Supplier
ZGB-I
DN50 - DN300
150lb to 2500lb
API 6D, CE, ISO9001
Light Industrial, Electric Power, Petroch
20~45 Days According to The Specific Quantities
NIPO
Standard Export Wooden Case
API6D, ISO9001, CE, SGS, etc
Wenzhou, Zhejiang, China
8481804090
Product Description
ZGB-I In Line Deflagration Flame Arrester
Model ZGB-I is designed to perform as an extinguishing barrier,which absorbs and dispels heat,reduces fire temperature and the oxygen level to stop the fire through layers of metal ribbons shaped with crimped corrugations.It is mounted either horizontally or vertically between two lines or used with pressure vacuum vant on storage tanks.
Arrestor is a protective device which use as prevent inflammable gas,fluid's flame spread and avoid tempering cause to explosion,usually use at below conditions:
(1) transport inflammable gas and flammable gas pipeline
(2) storage petroleum and petroleum product tank
(3) with explosion insecure system vent-pipe
(4) oil and gas recycling system
(5) regenerative boiler burning gas pileline net
(6) gas engine exhaust system
(7) torch system
Main technology parameter
Use as storage flash point lower than 60ºC petrochemical product,such as Gasoline ,kerosene,light diesel oil,toluene etc.
Working temperature≤180ºC
Body material:carbon steel,aluminum alloy,stainless steel:SUS304,SUS304L,SUS316,SUS316L.
Arrestor core material:stainless steel corrugated sheet.
Explosion-proof level:BS5501:IIA,IIB,IIC.
Working pressure:0.6Mpa-5.0Mpa,high pressure should decide by customer.
Maintenance and servicing
ΔArrester should check every half a year,check the flame retardant layer core whether block,deformation,corrosion etc.
ΔWhen find block flame retardant layer core should clean,insure every hole in core are unobstructed,should change the deformation,corrosion flame retardant layer.
ΔReinstallation the fire resistant layer core parts,should ensure that the combination of surface close not leak.
PRODUCT
WORKSHOP
INSPECTION
FAQ:
Q:Why choose us ?
A: we are a manufacturer, we have been manufacturing check valve more than 20 years.
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment. or L/C.
Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
Q: what is your main market?
A: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Model ZGB-I is designed to perform as an extinguishing barrier,which absorbs and dispels heat,reduces fire temperature and the oxygen level to stop the fire through layers of metal ribbons shaped with crimped corrugations.It is mounted either horizontally or vertically between two lines or used with pressure vacuum vant on storage tanks.
Arrestor is a protective device which use as prevent inflammable gas,fluid's flame spread and avoid tempering cause to explosion,usually use at below conditions:
(1) transport inflammable gas and flammable gas pipeline
(2) storage petroleum and petroleum product tank
(3) with explosion insecure system vent-pipe
(4) oil and gas recycling system
(5) regenerative boiler burning gas pileline net
(6) gas engine exhaust system
(7) torch system
Main technology parameter
Use as storage flash point lower than 60ºC petrochemical product,such as Gasoline ,kerosene,light diesel oil,toluene etc.
Working temperature≤180ºC
Body material:carbon steel,aluminum alloy,stainless steel:SUS304,SUS304L,SUS316,SUS316L.
Arrestor core material:stainless steel corrugated sheet.
Explosion-proof level:BS5501:IIA,IIB,IIC.
Working pressure:0.6Mpa-5.0Mpa,high pressure should decide by customer.
Maintenance and servicing
ΔArrester should check every half a year,check the flame retardant layer core whether block,deformation,corrosion etc.
ΔWhen find block flame retardant layer core should clean,insure every hole in core are unobstructed,should change the deformation,corrosion flame retardant layer.
ΔReinstallation the fire resistant layer core parts,should ensure that the combination of surface close not leak.
PRODUCT
WORKSHOP
INSPECTION
FAQ:
Q:Why choose us ?
A: we are a manufacturer, we have been manufacturing check valve more than 20 years.
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment. or L/C.
Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
Q: what is your main market?
A: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
