Audited Supplier
JX-S100
Whole Life Technical Support
One Year
New
Customized
Electrical Signal
Catalysis; Electrochemistry; S
Combustible Gas; Liquid Vapor Tvoc;
Natural Diffusion
(0~100%)Lel; 0-****Ppm
1%Lel; 1ppm/0.1ppm
Full Scale ±3%Lel
LCD Indication
Controller
<15s
<30s
<95%
Flameproof Type
IP65
G1/2
86kpa~106kpa;
J&X
Wooden Case
1500g
China
9027100090
Product Description
Zhongan S100 point gas detector
Zhongan S100 point gas detector can meet the sound and light alarm prompts of gas detection site, and display and monitor the gas concentration in real time. The on-site debugging adopts infrared remote control, and the parameters can be set without opening the cover.
Zhongan S100 point gas detector is developed according to national standards and national quality technical requirements. This instrument can meet the sound and light alarm prompts of gas detection site, and display and monitor the gas concentration on site in real time. The on-site debugging adopts infrared remote control, and the parameters can be set without opening the cover.
Zhongan S100 point gas detector can convert the concentration signal of leaked gas in the air into electrical signal for remote transmission. The instrument can adopt two-wire RS3082, three-wire 4~20mA or four-bus RS485 output mode, which has the advantages of long transmission distance and anti-interference.
Zhongan S100 point gas detector is widely used in industrial environment to detect the leakage concentration of combustible gas, toxic and harmful gas.
technical indicators:
| Detection principle | catalysis; electrochemistry; semiconductor; infrared |
| Detection gas | combustible gas; liquid vapor TVOC; toxic and harmful gas |
| Sampling method | natural diffusion |
| Test range | (0~100%)LEL; 0-****PPM |
| Resolution | 1%LEL; 1PPM/0.1PPM |
| Measurement error | Full scale ±3%LEL |
| Status indication | LCD indication |
| Debugging method | controller |
| Response time | <15s |
| Recovery time | <30s |
| Ambient temperature | -40ºC~70ºC |
| Relative humidity | <95%; |
| Explosion-proof method | Flameproof type |
| Explosion-proof grade | Exd || C T6 Gb |
| Explosion-proof certificate number | CNEx16.2871 |
| Protection level | IP65 |
| Power supply | DC24V/36V ±10% |
| Output signal | 4~20mA or RS485 |
| Power consumption | ≤3W |
| Installation gong pattern | G1/2 |
| Cable used | ≥1.5mm2×3; ≥1.5mm2×4 |
| Maximum distance between detector and host | ≤1500m; |
| Machine weight | ≤1500g; |
| Pressure limit | 86kPa~106kPa; |
| Use place | Use in dangerous places with explosive flammable gas level IIA~IIC and temperature group T1~T6 |
