Audited Supplier
ZJA
ISO9001
Transformer Oil
380V
100 L/min
High Efficient Used Transformer Waste Oil Filter
Electrical Servicer
Remove Water, Gases, Acid, Particles From The Oil
High Working Vacuum, High Filtration Speed, Oil
It Can Be Sealed or Movable with Trailer
30L/Min, 50L/Min, 100L/Min, 150L/Min, 200L/Min
<0.5MPa
-0.08 ~ -0.0999MPa
20 - 80 Celsius
Three Phase, 380V, 50Hz, or as Quested
Breakdown Voltage >60kv
Water Content 5-10ppm
EXW, Fob, DDU, CNF, CIF, etc.
30 Days
by Sea
Delta
Transformer Oil Filter Is Packed in Containe
30L/min, 50L/min, 100L/min, 150L/min, 200L/min
China Mainland
8421299090
Product Description
ZJA Series High Efficient Used Transformer Waste Oil Filter Equipment
Transformer oil is very important to reliability, performance and lifetime of transformer. The oil should be free from moisture, dissolved gases, particles, etc. Even some new oils may require treatment to acceptable level before injecting into the transformer;
Our ZJA Series Used Transformer Waste Oil Filter Equipment is professional for treatment of transformer oil, it can efficiently remove water, gases, acid, particles, etc. from the oil.
With the advantages of high working vacuum, high filtration speed, oil quality protection, the filter advanced the oil treatment technique and equipment performance and once can raise the puncture voltage up to over 35V.
ZJA Used Transformer Waste Oil Filter Equipment can be installed by sealed regular or movable with a trailer, so it is suitable to treat oil, fill oil in vacuum chamber and circulating dry hot-oil when large transformer is being installed and overhauled.
| Parameters | Unit | 1.8KY | 3KY | 6KY | 9KY | 12KY | 18KY |
| Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 18000 |
| Working Vacuity | Pa | ≤80 | ≤80 | ≤80 | ≤80 | ≤80 | ≤80 |
| Working Pressure | Mpa | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| Temperature Range | ºC | 45-65 | 45-65 | 45-65 | 45-65 | 45-65 | 45-65 |
| Power Supply | 50Hz | 380V | 3-Phase | 4-Wire | or as request | ||
| Total Power | KW | 16 | 36 | 70 | 100 | 150 | 200 |
| Inlet/Outlet Diameter | mm | 20/20 | 25/25 | 32/32 | 40/40 | 50/50 | 65/65 |
| Length | mm | 1600 | 1800 | 2200 | 2500 | 2800 | 3450 |
| Width | mm | 1250 | 1450 | 1600 | 1950 | 2150 | 2600 |
| Height | mm | 2000 | 2200 | 2450 | 2700 | 3000 | 3000 |
| Weight | Kg | 500 | 700 | 1460 | 1800 | 2400 | 4000 |
Oil Quality after purifying:
| No. | Parameters | Unit | Value |
| 1 | Breakdown Voltage | kV | 60 ~ 70 |
| 2 | Water Content | ppm | 5 ~ 10 |
| 3 | Gas Content | % | ≤0.01 |
| 4 | Filtering Accuracy | µm | 1 ~ 5 |
| 5 | Acid value | mgKOH/g | ≤0.03 mgKOH/g |
Imported vacuum-pump from Europe has preceding level in the world and high air pump speed guarantee high working vacuity.
New technology of vacuum-segregating adopts particular spinning disk and stainless steel machine with dehydration and air pump.
Using new type of heating equipment which can reduce heating burthen and extend oil life.
Oil level control adopts photoelectric way of which the main components are imported from Switzerland.
Customers can choose equipment equipped with all or partly imported components.
It's equipped with filter assemblies imported from Italy.
All pumps must be airproofed by our factory, moreover running without noise and leakage. extended oil life.
