Audited Supplier
Metallised film
Metallized Film for Capacitor Use
Metallized Film
BOPP
Metallized Polypropylene Film
Soft
Opaque
Multiple Extrusion
1.9-12micron
10-150mm
75mm
180mm, 200mm,220mm, 240mm,270mm,280mm,300mm, 320mm
1 Pair
Film Capacitor
0.5mm, 1mm, 1.5mm,2mm,2.5mm,3mm,5mm
Accept Customized Metallized Film
Over 400VDC
3mm
+-0.2mm
+-2%
0.905 G/mm3
7-15days
2-4/6-9ohm/Sq
CSF, SAIFU
Standard Export Pallet Packing for Metallised Film
Metallised film for capacitor use
China
3920209090
Product Description
Types of Metallized film Layer:
Metallised Film Introduction
Square Resistance
Inside/outside core diameter:
Metallised film metallization type
Specifications of metallized film:
(MPP Film):
Metallised Film Introduction | Base film | PP | PET |
| Normal thickness | 2.0μm ~12.0μm | 1.9μm ~12.0μm |
| Margin type | Single, two margins | |
| Coating metal | Zinc-Aluminum alloy,Aluminum | |
| Coating side | Single,two sides | |
| Edge structure | Heavy edge | |
| Cutting type | Straight cut, wave cut | |
Square Resistance
| Reinforced resistance | Normal resistance |
| (2~4)Ohm/sq | (6~9)Ohm/sq |
| (1~3)Ohm/sq | (4~6)Ohm/sq |
| (1~3)Ohm/sq | (12~18)Ohm/sq |
| (2~4)Ohm/sq | (17~23)Ohm/sq |
Inside/outside core diameter:
| Inside core diameter/Tolerance | Outside core diameter/Tolerance | ||
| 75mm | +1/-0.5mm | 220 280 320 | ±20mm ±20mm ±20mm |
| Note: A pair tolerance of outside core diameter ≤2mm. | |||
Metallised film metallization type
Specifications of metallized film:
(MPP Film):
| Properties | Unit | Typical value |
| Density | g/cm3 | 0.905±0.005 |
| Thickness | um | 2.2-15 |
| Tensile Strength | MD(MPa) | ≥100 |
| Elongation at Break | MD(%) | 20~200 |
| Elastic Modulus | MD(MPa) | 2800 |
| Heat Shrinkage | MD(%) | ≤5 ( 120ºC, 10min) |
| Wetting Tension | mN/m | 38(Corona treated side) |
| Surface Roughness | µm | 0.08 |
| Melting Point | ºC | 172 |
| Volume Resistivity | Ω.m | >1015 |
| Break-dowm Voltage | V/µm | ≥350(23ºC,DC) |
| Dielectric Constant | 2.2 (20ºC,1KHz) | |
| Dissipation Factor | ≤5×10-4 (20ºC,1KHz ) |
(MPET Film):
| Properties | Unit | Typical value |
| Density | g/cm3 | 1.4 |
| Thickness | um | <5 5 ~12 >=12 |
| Tensile Strength | MD(MPa) | ≥84 ≥108 ≥120 |
| Elongation at Break | MD(%) | ≥22 ≥33 ≥44 |
| Elastic Modulus | MD(MPa) | 3500 |
| Break-dowm Voltage | V/ | >=200 >=250 (23ºC,DC) (23ºC,DC) |
| Heat Shrinkage | MD(%) | <=2.5(150ºC, 10min) |
| Surface Roughness | µm | 0.095 |
| Melting Point | ºC | 256 |
| Volume Resistivity | Ω.m | >1015 |
| Dielectric Constant | 3.2 | |
| Dissipation Factor | ≤60×10-4 | |
| RC | ΩF | ≥1×104 |
Note: Other specifications of metallised film can be negotiable.
Metallised film Packing
1)Film rolls are packed in plastic bags, vacuumed and put into desiccant for heat sealing.2)The Bags are marked with type labels, mark thickness width, free margin width and resistance.
3)The bags are packed in carton cases.
4)The cartons are wrapped by wooden cases or reinforced carton.
Metallised film Storage:
Metallized film should be stored in its original package with temperature 5 - 35ºC and humidity less than 85%RH before using.Metallized layer is easily oxidized when exposure to moisture. Therefore, the film should be used as soon as possible when opened.
The recommended temperature is 15 -25ºC with humidity less than 60%RH after opening.
With original sealed package, and stored as mentioned above, the storage time can be as following:
Al metallized film: 12 months from the delivery date.
Al/Zn Alloy metallized film: As zinc is quite unstable , the storage period (from delivery date) depends on the resistance of the film:
≤10 Ohm/sq: 6 months
10 ~30Ohm/sq: 3 months
>30Ohm/sq: 1month
Appliactions of Metallised film
Company HonorOur company has obtained ISO9001 quality management system certificate, ISO14001 environment management system certificate, OHSAS18001 occupational health and safety management system certificate.
A Tour of metallised film plant
Metallised film Metalliser
Metallised Film slitterOur Advantages:
Aim : Quality first, Customer formost, knight service, Sustainable improvement, to be reliable supplier of metallised film.
