Audited Supplier
OK 4300
Construction, Plastcl, Acrylic
UV Curing
Clear
Organic Material
Solvent
Instant Adhesive
Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Glass/Crystal Bonding
Initiator
Organic Material
868-77-9
(C4h6o2)X
Tq2700000
High Transpatent Liquid Super Glue
Modified Acrylate
Light and Moisture Curing Adhesive
Ethyl-Cyanoacrylate
Weatherablity and Waterproof
Clear/Light Green
12 Months
600-1200 Cps
Over 18.0 MPa
5-8 Seconds
30 Minutes
-20~85
JUJU, Ever, Okebond, Or OEM
Paper CTN
20g/Bottle 12pcs/box, 12box/ctn
China
35069900
Product Description
About OkeBond®
In new energy Automobile
Adhesive and automatic dispensing equipment field
OKEBond® is your trusted professional partner
In new energy Automobile
Adhesive and automatic dispensing equipment field
OKEBond® is your trusted professional partner
Light Curing UV Adhesive
Glass and Crystal Bonding UV Glue
OK-4300
UV Glue also named as Tracelss Boding Glue or Shadowless glue,
made from modified acrylate. It's a one component transparent material
that easily allows ultraviolet rays to penetrate, and the active factors in
the adhesive are activated by UV light of the sunshine or UV lamp and
then curing, packaged in a black sealed. plastic bottle, double cured
with light and moisture. The photoinitiator or photosensitizer in UV cured
materials absorbs ultraviolet light and produces reactive free radicals or
cations, triggering monomer polymerization and crosslinking chemical
reactions, causing the adhesive to transform from liquid to solid within
seconds
Prepolymers: epoxy acrylate, acrylic resin, etc
Initiating agent: benzophenone, etc
Glass and Crystal Bonding UV Glue
OK-4300
UV Glue also named as Tracelss Boding Glue or Shadowless glue,
made from modified acrylate. It's a one component transparent material
that easily allows ultraviolet rays to penetrate, and the active factors in
the adhesive are activated by UV light of the sunshine or UV lamp and
then curing, packaged in a black sealed. plastic bottle, double cured
with light and moisture. The photoinitiator or photosensitizer in UV cured
materials absorbs ultraviolet light and produces reactive free radicals or
cations, triggering monomer polymerization and crosslinking chemical
reactions, causing the adhesive to transform from liquid to solid within
seconds
Prepolymers: epoxy acrylate, acrylic resin, etc
Initiating agent: benzophenone, etc
1. Fast Curing, high Bonding strength, high toughness, high impact
force, colorless and transparent adhesive layer after curing.
2. Easy bonding transparent objects or one-sided light-transmitting can
be bonded, like glass turntable, gladd tea table, crystal crafts, jewlry,
ornaments, lamps, glass, water tank etc.,
3. Widely used for the bonding of glass and metal, for the bonding and
seembly of glass furniture, handicrafts.
4. Non-whitening and no yellowing, aging resistance, high transparency
and non-toxic
5. Fast Curing, with higher strength, less than 5 seconds curing under
Sunlight or Ultra Violet Lamp.
force, colorless and transparent adhesive layer after curing.
2. Easy bonding transparent objects or one-sided light-transmitting can
be bonded, like glass turntable, gladd tea table, crystal crafts, jewlry,
ornaments, lamps, glass, water tank etc.,
3. Widely used for the bonding of glass and metal, for the bonding and
seembly of glass furniture, handicrafts.
4. Non-whitening and no yellowing, aging resistance, high transparency
and non-toxic
5. Fast Curing, with higher strength, less than 5 seconds curing under
Sunlight or Ultra Violet Lamp.
1 Preparation before dispense glue
Clean the bonding surface, remove the dusty or oil, the water film on the
glass surface have to be removed with organic solvent)
2 Based on the area, determine the dispensing amount of glue and
start coating the adhesive, too much glue will be not helpful for
the bonding strenght and speed of curing, genereally one thin lower of
the adhesive would be best effects and efficiency.
3 Pressing slightly to make the adhesive layer evenly distributed and
discharge bubbles, and then irradiate the area of bonding with lamp
10~20s to cure, or just put it under the sunshine.
How the UV glue solve the Whitening problem? Transparent materials are easily penetrated by ultraviolet rays, and the active factors in the adhesive are activated by light and solidify. The fast curing of the adhesive will reduce the evaporation of glue, thereby fundamen | What is the materials right for UV Glue? Metal + Glass, Glass + Glass, Crystal + Crystal, Glass + Crystal, etc., Asemble Line like 3C electronic products allow the light to cure the glue fastly, or one-sided transparent materials will be perfect to use this type of UV adhesive |
Small Glue, Great Power! Craftsmanship manufacturing, Building World-famous Brand |
